Fujitsu PRIMERGY RX600 S3 SAS Service Supplement Manual page 40

Replacing the system board
– Remove the counterholder (B) of the PCI board.
Ê Remove the RoMB components (see
Figure 20: Removing the PCI divider insert
Ê Remove the PCI divider insert as follows:
– Press the two plastic clips (A) in the direction of the arrow.
– Lift the PCI divider insert upward (B).
Ê Unplug any cables that are still connected to the system board.
40
A
Service Supplement RX600 S3 SAS
Replacement routines
page 38)
B