Table of Contents
Advertisement
3
Checking network settings of this machine
Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
Tips
-
In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
-
If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
-
For information on the default administrator password, refer to the User's Guide CD/DVD.
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name
Host Address
File Path
User ID
Password
3-14
Entry column
Host name or IP address to which the scanned data is sent
Name of the dedicated folder to receive the scanned data
User name required to log in to the computer
Password required to log in to the computer
•
You should not enter this column for security reasons.
Scan-to-Send function
Detail
page 3-15
page 3-15
page 3-15
Contact your sys-
tem administrator.
d-COLOR MF759
3.2
Advertisement
Table of Contents
