Table of Contents

Advertisement

Quick Links

QUICK GUIDE
d-COLOR MF759

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the d-Color MF759 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Olivetti d-Color MF759

  • Page 1 QUICK GUIDE d-COLOR MF759...
  • Page 3: Table Of Contents

    LK-105 v4 (Searchable PDFs) End User License Agreement........1-27 About this machine Intended use of office MFP devices ....................2-3 Intended use ............................2-3 Impermissible operating conditions....................2-3 Exclusion of liability..........................2-3 Introduction to user's guide......................2-4 d-COLOR MF759 Contents-1...
  • Page 4 Job screen ............................2-32 2.7.2 Multi-job function ..........................2-32 Loading Paper ..........................2-33 2.8.1 Loading paper in Tray 1 to Tray 2 .....................2-33 Applicable paper types ........................2-33 Applicable paper sizes ........................2-33 How to load paper ........................... 2-33 Contents-2 d-COLOR MF759...
  • Page 5 Preparation flow..........................3-20 Operation flow..........................3-21 Checking the cable connection ....................... 3-21 Checking network settings of this machine ..................3-21 Configuring this machine ......................... 3-22 Checklist ............................3-23 Checking computer information ...................... 3-23 Configuring your computer ......................3-23 d-COLOR MF759 Contents-3...
  • Page 6 Getting help on the desired function or procedure:................. 3-70 Help Menu list ..........................3-72 Using the [Quick Security] function .................... 3-73 3.8.1 [Quick Security]..........................3-73 Required settings ..........................3-73 Advanced Functions Using advanced functions......................4-3 4.1.1 What are advanced functions? ......................4-3 4.1.2 Association with application .......................4-4 Contents-4 d-COLOR MF759...
  • Page 7 Replacing an Imaging Unit........................5-16 5.5.4 Replacing a Staple Cartridge ......................5-17 Finisher FS-537/Finisher FS-537 SD ....................5-17 Finisher FS-536/Finisher FS-536 SD ....................5-18 5.5.5 Replacing a Saddle Staple Cartridge....................5-19 Finisher FS-537 SD .......................... 5-19 Finisher FS-536 SD .......................... 5-20 Index d-COLOR MF759 Contents-5...
  • Page 8 Contents-6 d-COLOR MF759...
  • Page 9: Introduction

    Introduction...
  • Page 11 The illustrations and screens used in this manual may appear slightly different from views of the actual equip- ment and screens. Tips Please keep this manual as well as the attached CD/DVD in a safe place where you can access them easily. d-COLOR MF759...
  • Page 12: Environmental Information

    With a product which has a duplex unit, you can print on both sides of paper automatically. Using this function leads to reducing consumption of natural resources and your cost. Attached printer driver provides this duplex printing function as initial setting in your computer (The setting can be changed after installation manually). d-COLOR MF759...
  • Page 13: Certification

    Certification Certification For Europe This product is certified by the following model name in Europe. OLIVETTI branded model C504501 (ineo+ 759). d-COLOR MF759...
  • Page 14: Safety Information

    These are some of major exemplary graphical symbols Graphic Descriptions Graphic Descriptions Graphic Descriptions symbols symbols symbols General prohibi- Do not disassem- Do not touch tion General instruc- Ground/Earth Unplug from outlet tion General precau- High temperature Electrical shock tion hazard d-COLOR MF759...
  • Page 15: Power Source Connection

    Make sure to ground this product. (Connect the power cord to an electri- cal outlet that is equipped with a grounding terminal.) Failure to do so and an unlikely event of leakage could result in a fire or electrical shock. d-COLOR MF759...
  • Page 16: Installation

    Make sure that the power cord is placed on a site in which no person would step on or trip over it. Stepping on or tripping over the power cord could heat the power cord, resulting in a fire or electric shock. d-COLOR MF759...
  • Page 17: Using The Product

    Do not use flammable sprays, liquids, or gases inside or near this ma- chine. Do not clean the inside of this machine using a flammable gas duster. A fire or explosion could result. d-COLOR MF759...
  • Page 18 When using the machine, do not look at the light of the lamp for a pro- longed time. Eyestrain could result. Do not use stapled paper, conductive paper (such as silver paper or car- bon paper) or treated heat-sensitive/inkjet paper, otherwise a fire may re- sult. 1-10 d-COLOR MF759...
  • Page 19: Consumables

    Then, leave the machine to stand idle for a specified period of time and make sure that the fusing section has cooled down to room temperature. Failure to follow these in- structions could result in a burn. d-COLOR MF759 1-11...
  • Page 20: Regulation Notices

    Regulation notices CE Marking (Declaration of Conformity) for users of the European Union (EU) Hereby, Olivetti declares that the radio equipment types d-COLOR MF759 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: "http://www.olivetti.com/en/advanced-caring/assurance-and-support/download-area/certificates".
  • Page 21: Interference-Causing Equipment Standard (Ices-003 Issue 5) (For Canada Users)

    The laser diode and the scanning polygon mirror are incorporated in the print head unit. The print head unit is NOT A FIELD SERVICE ITEM: Therefore, the print head unit should not be opened under any circumstances. Laser Aperture of the Print Head Unit Print Head d-COLOR MF759 1-13...
  • Page 22: Cdrh Regulations

    Pour avoir la certitude de travailler dans un environnment réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil. 1-14 d-COLOR MF759...
  • Page 23: Acoustic Noise (For European Users Only)

    USB Host Connect USB devices (Memory, Authentication, Hub etc.) devices directly to the USB host. If an extension cable is used, electromagnetic interference could occur. d-COLOR MF759 1-15...
  • Page 24: Graphic Symbols Used On This Machine

    CLASS II EQUIP- Class II equip- Functional earthing MENT ment with func- tional earthing General precau- High tempera- Electrical shock hazard tion ture CAUTION CAUTION moving fan blade DOUBLE POLE / NEUTRAL FUS- 1-16 d-COLOR MF759...
  • Page 25: Caution Notations And Labels

    Do not remove caution labels or notations. If any caution label or caution notation is soiled, please clean to make legible. If you cannot make them legible, or if the caution label or notation is damaged, please contact your service representative. d-COLOR MF759 1-17...
  • Page 26: Special Notice To User

    Special notice to user Special notice to user For Europe The Facsimile has been confirmed to meet the standards (or requirements) ETSI for pan-European single ter- minal connection to the public switched telephone network (PSTN). 1-18 d-COLOR MF759...
  • Page 27: Space Requirements

    To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance can easily be performed, adhere to the recommended space requirements detailed below. d-COLOR MF759 + FS-537 SD + RU-515 + PI-507 + LU-205 Unit: inch (mm) d-COLOR MF759 + FS-537 SD + RU-515 + PI-507 + LU-303...
  • Page 28 Space requirements d-COLOR MF759 + FS-536 SD + RU-515 + LU-205 Unit: inch (mm) d-COLOR MF759 + FS-536 SD + RU-515 + LU-303 Unit: inch (mm) d-COLOR MF759 + MK-715 + CU-102 Unit: inch (mm) NOTICE Be sure to allow a clearance of 3-15/16 inches (100 mm) or more at the back of this machine for the ventilation duct.
  • Page 29: Operation Precautions

    For details of the overwrite all data function, refer to the User's Guide. Contact your service representative before deleting data. It is recommended to backup HDD periodically as the measures for HDD defect. For the detail information of HDD backup, contact your service representative. d-COLOR MF759 1-21...
  • Page 30: Legal Restrictions On Reproduction

    This machine provides the forgery prevention function in order to prevent financial instruments from being re- produced illegally. We appreciate your understanding that printed images may infrequently have some noise or image data may not be stored under certain circumstances due to this forgery prevention function. 1-22 d-COLOR MF759...
  • Page 31: Trademark Acknowledgements

    "Advanced Wnn"© OMRON SOFTWARE CO., Ltd. 2006 All Rights Reserved. ABBYY and FineReader are registered trade marks of ABBYY Software House. ThinPrint is a registered trademark or trademark of Cortado AG in Germany and other countries. QR Code is a registered trademark of DENSO WAVE INCORPORATED. d-COLOR MF759 1-23...
  • Page 32 All other product and brand names are trademarks or registered trademarks of their respective companies or organizations. Note User's Guide may not be reproduced in part or in full without permission. Information included in User's Guide is subject to change without notice. 1-24 d-COLOR MF759...
  • Page 33: Software License Agreement

    Software, even if Konica Minolta, its affiliate companies, its authorized remarketers or Konica Minolta Licensor have been advised of the possibility of such damages or for any claim by you based on a third party claim. d-COLOR MF759 1-25...
  • Page 34 BOUND BY ITS TERMS AND CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY OTHER STATE- MENTS OR REPRESENTATIONS THAT ARE INCONSISTENT WITH THE TERMS AND CONDITIONS OF THIS AGREEMENT. NO AMENDMENT TO THIS AGREEMENT IS EFFECTIVE UNLESS IN WRITING AND SIGNED BY DULY AUTHORIZED REPRESENTATIVES OF EACH PARTY. 1-26 d-COLOR MF759...
  • Page 35: I-Option Lk-105 V4 (Searchable Pdfs) End User License Agreement

    This license shall automatically terminate upon a failure on your part to comply with any term or condi- tion of this Agreement, in which case you agree to immediately stop use of the Program. This Agreement shall be governed by the laws of Japan. d-COLOR MF759 1-27...
  • Page 36 LK-105 v4 (Searchable PDFs) End User License Agreement 1.12 1-28 d-COLOR MF759...
  • Page 37 About this machine...
  • Page 39: About This Machine

    Errors or damage have been discovered, Maintenance intervals have been exceeded, Mechanical or electrical functions do not work as they should. Exclusion of liability The manufacturer of the system assumes no liability for damages if the system was operated under imper- missible conditions. d-COLOR MF759...
  • Page 40: Introduction To User's Guide

    (Some pages are not targeted for searching.) [Search by Usage] Searches for the required operations of this machine based on a re- quest "to do something". This function also provides security meas- ures against various situations and methods to realize cost reductions. d-COLOR MF759...
  • Page 41: Operating Environment

    This check mark symbol shows a precondition of a procedure. This format number "1" represents the first step. This format number represents the order of serial steps. % This symbol indicates a supplementary explanation of a procedural instruction. d-COLOR MF759...
  • Page 42: Screens

    Some of the screen displays for this machine vary depending on whether the fax function is available. This manual describes procedures using the screen displays when the fax function is available. When the fax function is not available, change "Scan/Fax" to "SCAN" to read a description. d-COLOR MF759...
  • Page 43: About This Machine

    This is also used when the Authentication Unit AU-102 or Authenti- cation Unit AU-201S is installed. Keypad KP-101 It is equipped on the side of the Control Panel. Allows you to enter numbers by using the Hardware Keypad. d-COLOR MF759...
  • Page 44 This unit also allows you to manually operate the finisher (only the lower tray is available). Job Separator JS-602 Install this unit onto the Finisher FS-537/FS-537 SD. This unit sorts printed sheets. Output Tray OT-508 Outputs printed pages. d-COLOR MF759...
  • Page 45: List Of Other Optional Components

    Prevents paper in a paper tray from being affected by humidity. The Heater HT-508 is installed as standard in some areas. Hard Disk HD-524 Install this unit to perform mirroring of the hard disk contained in the main unit. d-COLOR MF759...
  • Page 46: Name Of Parts (Mfp)

    Open this door to replace consumables or to maintenance this ma- chine. Upper Front Door Open this door to replace a Toner Cartridge. Data Indicator Flashes blue while this machine is receiving a job. If a job is currently spooled, this indicator lamp lights up blue. 2-10 d-COLOR MF759...
  • Page 47: Side/Rear

    Telephone Jack 3 (LINE PORT3) Power Cord Heater Power Switch Telephone Jack 1 (LINE PORT1) Jack for connecting a telephone (TEL PORT1) Network Connector (10Base-T/100Base-TX/1000Base-T) USB Port (Type A) USB2.0/1.1 Telephone Jack 2 (LINE PORT2) USB Port (Type B) USB2.0/1.1 d-COLOR MF759 2-11...
  • Page 48: Name Of Parts (Optional Units)

    This section shows the names of distinctive parts for each optional unit that can be installed in this machine. Finisher FS-537/Finisher FS-537 SD/Punch Kit PK-523/Z Folding Unit ZU-609 Name Output Tray Staple Cartridge Punch Kit Punch Scrap Box Saddle Stitcher 2-12 d-COLOR MF759...
  • Page 49 About this machine Name Z Folding Unit Saddle Staple Cartridge 1 Saddle Staple Cartridge 2 Folding Output Tray Stopper d-COLOR MF759 2-13...
  • Page 50: Job Separator Js-602

    About this machine Job Separator JS-602 Name Output Tray 2-14 d-COLOR MF759...
  • Page 51: Post Inserter Pi-507

    About this machine Post Inserter PI-507 Name Lower Tray Upper Tray Post Inserter Control Panel Reference For details on how to use the Post Inserter Control Panel, refer to the User's Guide CD/DVD. d-COLOR MF759 2-15...
  • Page 52 About this machine Finisher FS-536/Finisher FS-536 SD/Punch Kit PK-520 Name Output Tray Staple Cartridge Punch Scrap Box Saddle Stitcher 2-16 d-COLOR MF759...
  • Page 53 About this machine Name Punch Kit Saddle Staple Cartridge 1 Saddle Staple Cartridge 2 Folding Output Tray d-COLOR MF759 2-17...
  • Page 54 About this machine Large Capacity Unit LU-303/LU-205 2-18 d-COLOR MF759...
  • Page 55: Power Supply

    Open the Lower Front Door, and press n on the Main Power Switch. Press o on the Main Power Switch. NOTICE When restarting this machine, turn the Main Power Switch off and on again after 10 or more seconds have passed. d-COLOR MF759 2-19...
  • Page 56: Operating The Power Key

    Power OFF mode, they are printed when the machine returns to the normal mode. Normal mode During opera- Lights up blue. tion Tips When the optional Image Controller is installed, the machine cannot shift to the Sub Power OFF mode. 2-20 d-COLOR MF759...
  • Page 57: Power Save Function

    To enable the machine to return to the normal mode from the Sub Power OFF or ErP Auto Power OFF mode, press the Power key again. Tips When the optional Image Controller is installed, [Power Key Setting] is not displayed. Reference For details, refer to the User's Guide CD/DVD. d-COLOR MF759 2-21...
  • Page 58: Control Panel

    Press this key to reset the settings you entered or changed on the Control Panel. Stop Press this key to temporarily stop an active copy, scan, or print job. Start Press this key to start an operation such as copying, scanning, faxing, or printing. 2-22 d-COLOR MF759...
  • Page 59 Use this keypad to enter numeric values such as the number of cop- ies, zoom ratio, and fax number. C (Clear) All the numeric values(number of pages, magnification, size, etc), which have been entered by Keypad, are canceled. d-COLOR MF759 2-23...
  • Page 60: Touch Panel

    Tap this button to configure settings of this machine or check the use status of this machine. • [Utility] is always displayed. Page switching key Tap this key to switch pages when main menu keys are assigned to multiple pages. 2-24 d-COLOR MF759...
  • Page 61: Customizing The Main Menu

    Up to five slide menus can be set. You can configure the setting to prevent the slide menu. Also, you can display the Keypad or change the background color. Reference For details, refer to the User's Guide CD/DVD. d-COLOR MF759 2-25...
  • Page 62: Operating The Touch Panel

    User Box. Flick Make a slight fillip while sliding your finger on the screen. Used to scroll the destination/job list or to feed a page in the Main menu screen/Preview screen. 2-26 d-COLOR MF759...
  • Page 63: Drag

    Slide your finger parallel in a front-to-back and side-to-side direction on the screen. Used to move to the in- tended display location if data spans multiple screens. Long-tap Hold down the document by the finger. Used to display the icon related to the document. d-COLOR MF759 2-27...
  • Page 64: Drag & Drop

    Place two fingers on the screen and then open or close them. Used to enlarge or reduce a preview image. Rotation Place two fingers on the screen and then rotate them. Used to rotate a preview image. 2-28 d-COLOR MF759...
  • Page 65: Precautions For Using The Touch Panel

    When tapping the input area on the copy screen and etc. for entering the number of copies or entering ad- justment values, the Keypad will be displayed. It can also be displayed by pressing the 10 Keypad key (default: Register key 3). Input area for entering the number of copies Input area for entering values d-COLOR MF759 2-29...
  • Page 66: How To Move The Keypad

    The Keypad can always be displayed to enable entry of the number of copies on the copy screen, User Box print setting screen, or browser print setting screen. Reference For details, refer to the User's Guide CD/DVD. 2-30 d-COLOR MF759...
  • Page 67: Entering Characters

    % If you mistyped, tap [ ] or [ ] to move the cursor to the character you want to clear, then tap the [Delete] key. % Tap the [Shift] key again to return to the original keyboard screen. After typing completes, tap [OK]. d-COLOR MF759 2-31...
  • Page 68: Jobs

    The table below shows the maximum number of jobs that can be registered for each function. Function Minimum number of jobs Maximum number of jobs Copy Print Fax memory TX + Scan Fax RX Sharing These values may vary depending on conditions. 2-32 d-COLOR MF759...
  • Page 69: Loading Paper

    Length: 7-3/16 to 18 inches (182 mm to 457.2 mm) How to load paper Pull out the tray. NOTICE Be careful not to touch the Film. Slide the Lateral Guide to fit the size of the loaded paper. d-COLOR MF759 2-33...
  • Page 70: Loading Paper In Tray 3 To Tray 4

    (4 e 6 (A6 Card)) Applicable paper sizes Type Size 8-1/2 e 11 v, 5-1/2 e 8-1/2 v, 4 e 6 w, A4 v, A5 v, B5 v, A6 Card w, Standard-size paper 16K v 2-34 d-COLOR MF759...
  • Page 71: How To Load Paper

    When you do not change the paper type when adding paper, you can use the current setting without making any changes. Change the paper type setting. % When loading paper other than plain paper, change the paper type setting. For details, refer to the User's Guide CD/DVD. d-COLOR MF759 2-35...
  • Page 72: Loading Paper Into The Large Capacity Unit

    12 e 18 w, 11 e 17 w to 8-1/2 e 11 w/v, SRA3 w, A3 w, B4 w, A4 w/v How to load paper Open the Upper Door. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. 2-36 d-COLOR MF759...
  • Page 73: Bypass Tray

    Monarch (3-7/8 inches e 7-1/2 inches (98.4 mm e 190.5 mm))) Custom-size paper Paper width: 3-9/16 inches to 12-5/8 inches (90 mm to 320 mm) Paper length: 5-1/2 inches to 47-1/4 inches (139.7 mm to 1,200 mm) d-COLOR MF759 2-37...
  • Page 74: Paper Not Available

    % To load large-sized paper, pull out the Tray Extension. % To load banner paper, install the optional Mount Kit MK-715. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. 2-38 d-COLOR MF759...
  • Page 75: Loading Postcards

    Load postcards in the w direction as shown in the figure with the print side facing down, then align the Lateral Guide to the paper. % Insert postcards into the tray until their edges are pressed against the back. max. 50 sheets NOTICE When loading postcards into the Bypass Tray, note the following points. d-COLOR MF759 2-39...
  • Page 76 The screen for selecting the paper type and paper size appears. Change the paper size setting. % In [Paper Size] - [Envelope/4 e 6] ([Envelope/A6 Card]), select [4 e 6] ([A6 Card]). Selecting [4 e 6] ([A6 Card]) sets [Paper Type] to [Thick3]. 2-40 d-COLOR MF759...
  • Page 77: Loading Transparencies

    Change the paper type setting. % Select [Transparency] from [Paper Type]. % Transparencies can only be printed in black. When the color function is other than black and [Trans- parency] is selected, check the displayed message, and tap [Yes]. d-COLOR MF759 2-41...
  • Page 78: Loading Envelopes

    % Insert envelopes into the tray until their edges are pressed against the back. % The flap side of envelopes cannot be printed on. max. 10 sheets NOTICE When loading envelopes into the Bypass Tray, note the following points. 2-42 d-COLOR MF759...
  • Page 79 % Do not put spare envelopes in the Bypass Tray. Doing so causes a size detection error. The screen for selecting the paper type and paper size appears. Tap [Envelope/4 e 6] ([Envelope/A6 Card]) from [Paper Size]. d-COLOR MF759 2-43...
  • Page 80: Loading Label Sheets

    Load label sheets in the w direction as shown in the figure with the print side facing down, then align the Lateral Guide to the paper. % Insert label sheets into the tray until their edges are pressed against the back. The screen for selecting the paper type and paper size appears. 2-44 d-COLOR MF759...
  • Page 81: Loading Index Papers

    % Insert index papers into the tray until their edges are pressed against the back. The screen for selecting the paper type and paper size appears. Change the paper type setting. % Select [Index Paper] from [Paper Type]. d-COLOR MF759 2-45...
  • Page 82 Loading Paper 2-46 d-COLOR MF759...
  • Page 83: Basic Settings And Operations

    Basic Settings and Operations...
  • Page 85: Print Function

    % Check the network settings of this machine. For details, refer to page 3-4. You can use this function with the default settings unless otherwise requested. Installing the printer driver % Install the printer driver on the computer. For details, refer to page 3-5. d-COLOR MF759...
  • Page 86: Operation Flow

    If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ- ment. For details, refer to the User's Guide CD/DVD. d-COLOR MF759...
  • Page 87: Installing The Printer Driver

    This driver is effective for high-definition printing of data created in PostScript- supporting application software from Adobe or other vendors. This driver is of- ten used in graphics and light printing applications where good color repro- ducibility is important. d-COLOR MF759...
  • Page 88: Required Settings And Basic Operations (For Mac Os)

    % Install the printer driver on the computer. For details, refer to page 3-9. Adding and configuring a printer driver % Set up your computer so that data can be printed using the installed printer driver. For details, refer to page 3-9. d-COLOR MF759...
  • Page 89: Operation Flow

    Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. Checking network settings of this machine Tap [Utility], and select [Device Information]. Check that the IP address is displayed. d-COLOR MF759...
  • Page 90 If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ- ment. For details, refer to the User's Guide CD/DVD. d-COLOR MF759...
  • Page 91: Installing The Printer Driver

    % If the target printer name is not displayed, select [Add Other Printer or Scanner] or [Add Printer or Scanner] to set up the printer. For details, refer to the User's Guide CD/DVD. Select the installed optional units. d-COLOR MF759...
  • Page 92: Printing Data

    Open the data you want to print using the application software. From the [File] menu, select [Print]. Select the Bonjour name of this machine. Tips If necessary, you can click [Show Details] to change the settings of the printer driver. 3-10 d-COLOR MF759...
  • Page 93: Scan-To-Send Function

    Send scanned data as an E-mail attachment. This function is useful when you want to forward data to an outside location. For details, refer to page 3-28. Saving data to the USB memory device (External memory) Directly save scanned data on the USB memory device connected to this machine. For details, refer to page 3-64. d-COLOR MF759 3-11...
  • Page 94: Various Methods For Transmitting And Saving Data

    Sending to a WebDAV server (WebDAV Send) Reference For details, refer to the User's Guide CD/DVD. 3.2.2 Sending data to your Windows computer (SMB Send) Send scanned data to a computer on the network. Once settings are configured, you can send data easily. 3-12 d-COLOR MF759...
  • Page 95: Preparation Flow

    Press the Start key. % Press the Start key to scan the original. Checking the cable connection Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. d-COLOR MF759 3-13...
  • Page 96: Checking Network Settings Of This Machine

    User ID User name required to log in to the computer page 3-15 Password Password required to log in to the computer Contact your sys- • You should not enter this column for security reasons. tem administrator. 3-14 d-COLOR MF759...
  • Page 97: Checking Computer Information

    Click the [Sharing] tab, and also click [Advanced Sharing]. Select the [Share this folder] check box, then click [Permissions]. Select [Everyone] from the [Group or user names:] list, then select all of the [Allow] check boxes. d-COLOR MF759 3-15...
  • Page 98: Registering Destinations

    For [Name], specify the name to be displayed on the assigned key. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap [Index]. 3-16 d-COLOR MF759...
  • Page 99 Scan-to-Send function While checking the checklist, enter the user ID and password you wrote down. While checking the checklist, enter the host address and file path you wrote down. Tap [Close]. d-COLOR MF759 3-17...
  • Page 100: Sending The Original

    Scan-to-Send function Sending the original Load the original. Tap [Scan/Fax]. Select a destination. 3-18 d-COLOR MF759...
  • Page 101 ON. You can load the pages of the original in several batches and handle them as one job. For details on using the separate scan function, refer to the User's Guide CD/DVD. Press the Start key. d-COLOR MF759 3-19...
  • Page 102: Sending Data To Your Mac Computer (Smb Send)

    % Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer to page 3-23. Registering destinations % Register destinations to which files are sent while checking the checklist. For details, refer to page 3-24. 3-20 d-COLOR MF759...
  • Page 103: Operation Flow

    If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ- ment. For details, refer to the User's Guide CD/DVD. d-COLOR MF759 3-21...
  • Page 104: Configuring This Machine

    Select [NTLM v1/v2] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client Settings], then tap [OK]. Select [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings] to specify the same date/time and time zone between this machine and your computer, then tap [OK]. 3-22 d-COLOR MF759...
  • Page 105: Checklist

    Select the [Share files and folders using SMB] and user name check boxes, then click [Done]. Under [Shared Folders:], click [+]. Select a new folder, then click [Add]. Click the new folder to check the access right. If the access right is changed to [Read & Write], the setting is completed. d-COLOR MF759 3-23...
  • Page 106: Registering Destinations

    For [Name], specify the name to be displayed on the assigned key. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap [Index]. 3-24 d-COLOR MF759...
  • Page 107 Scan-to-Send function While checking the checklist, enter the user ID and password you wrote down. While checking the checklist, enter the host address and file path you wrote down. Tap [Close]. d-COLOR MF759 3-25...
  • Page 108: Sending The Original

    Scan-to-Send function Sending the original Load the original. Tap [Scan/Fax]. Select a destination. 3-26 d-COLOR MF759...
  • Page 109 ON. You can load the pages of the original in several batches and handle them as one job. For details on using the separate scan function, refer to the User's Guide CD/DVD. Press the Start key. d-COLOR MF759 3-27...
  • Page 110: Transmit The Scanned Data Via E-Mail (E-Mail Tx)

    % Configure a server for E-mail TX. For details, refer to page 3-30. Configuring administrator information (Administrator) % Register the administrator name and E-mail address used as the sender's address of an E-mail to be sent. For details, refer to page 3-32. 3-28 d-COLOR MF759...
  • Page 111: Operation Flow

    If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ- ment. For details, refer to the User's Guide CD/DVD. d-COLOR MF759 3-29...
  • Page 112: Configuring The E-Mail Transmission Environment

    For information on the default administrator password, refer to the User’s Guide CD/DVD. Configuring the E-mail transmission environment Tap [Utility], and select [Administrator Settings] - [Network Settings] - [E-Mail Settings]. % For information on the default administrator password, refer to the User’s Guide CD/DVD. Tap [E-Mail TX (SMTP)]. 3-30 d-COLOR MF759...
  • Page 113 Scan-to-Send function Select [ON] to enable E-mail TX (SMTP) settings and E-mail TX function. Enter the SMTP server address. d-COLOR MF759 3-31...
  • Page 114: Configuring Administrator Information

    Scan-to-Send function Configuring administrator information Tap [Utility], and select [Administrator Settings] - [Administrator/Machine Settings] - [Administrator Reg- istration]. Enter the required information, then tap [OK]. 3-32 d-COLOR MF759...
  • Page 115: Sending The Original

    Scan-to-Send function Sending the original Load the original. Tap [Scan/Fax]. d-COLOR MF759 3-33...
  • Page 116 Scan-to-Send function Enter a destination. 3-34 d-COLOR MF759...
  • Page 117 ON. You can load the pages of the original in several batches and handle them as one job. For details on using the separate scan function, refer to the User's Guide CD/DVD. Press the Start key. d-COLOR MF759 3-35...
  • Page 118: Fax Function

    % Specify the name and fax number to be displayed as a sender when sending a fax from this ma- chine. For details, refer to page 3-37. Selecting the dialing method (Administrator) % Select the dialing method to suit your environment. For details, refer to page 3-39. 3-36 d-COLOR MF759...
  • Page 119: Operation Flow

    Check that a modular cable is connected to the LINE port of this machine. Registering transmission information Tap [Utility], and select [Administrator Settings] - [Fax Settings] - [Header Information]. % For information on the default administrator password, refer to the User’s Guide CD/DVD. d-COLOR MF759 3-37...
  • Page 120 Fax function Enter the sender information, then tap [OK]. % Sender settings Enter the name to be displayed as a sender. % Sender Fax No. Settings Enter the fax number to be displayed as a sender. 3-38 d-COLOR MF759...
  • Page 121: Selecting The Dialing Method

    If you do not know the type of the dialing method, operate push buttons of your phone. When you hear "beep boop beep", set [Dialing Method] to [PB]. If you do not hear "beep boop beep" after operating push buttons, select [10pps]. d-COLOR MF759 3-39...
  • Page 122: Sending The Original

    Fax function Sending the original Load the original. Tap [Scan/Fax]. 3-40 d-COLOR MF759...
  • Page 123 % You can also check the setting using the keys displayed on the Touch Panel. % To change the setting, tap the desired key on the Touch Panel. [Color], [File Type], and [File Name/Subject Name/Other] are not available when sending to a fax num- ber. d-COLOR MF759 3-41...
  • Page 124: Sending A Fax Directly From A Pc (Pc-Fax Tx)

    Completing fax operations without leaving your desk Offering clear images by sending data directly from a computer Tips To use this function, the optional Fax Kit is required. This function is not supported in the Mac operating system. 3-42 d-COLOR MF759...
  • Page 125: Preparation Flow

    % Create data to be sent using application software. Configuring the fax driver % Select a fax driver, and change the setting if necessary. Entering a destination to send data % Enter a destination to send data. d-COLOR MF759 3-43...
  • Page 126: Checking The Cable Connection

    If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ- ment. For details, refer to the User's Guide CD/DVD. 3-44 d-COLOR MF759...
  • Page 127: Installing The Fax Driver

    Enter the destination [Name] and [FAX Number]. % To send data to more than one destination, repeat this step. % Clicking [Add from Address Book] can retrieve the registered destinations of this machine. Click [OK]. d-COLOR MF759 3-45...
  • Page 128: Copy Function

    If user authentication is enabled, the login screen appears. Tap the entry area or keyboard icon to enter the required information, then tap [Login] or press the Access key. % If IC card or biometric authentication is enabled, refer to page 3-48. Load the original. Tap [Copy]. 3-46 d-COLOR MF759...
  • Page 129 Specify the zoom ratio. [Duplex/Combine] Specify double-sided copying or combine copying. [Finishing] Configure the offset, punch, or staple setting for output paper. [Density] Adjust the copy density. Tap the input area for entering the number of copies. d-COLOR MF759 3-47...
  • Page 130: User Authentication

    If IC card or NFC authentication is enabled, place the IC card or Android terminal on the card reader of the authentication unit. If biometric authentication is enabled, put your finger on the finger vein reader of the authentication unit. 3-48 d-COLOR MF759...
  • Page 131: Registering A Destination

    Using the Control Panel to register an address book - Registration from [Util- ity] Select a destination type, and register destination information. Tap [Utility], and select [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address Book]. Select the type of the destination you want to register. Tap [New]. d-COLOR MF759 3-49...
  • Page 132 For information on entry items, refer to page 3-57. Enter the fax number. % Tap [Display Keypad] to display the Keypad, and enter the fax number. Tap [Close]. 3-50 d-COLOR MF759...
  • Page 133: Using The Control Panel To Register An Address Book - Registration From [Address Book]

    Using the Control Panel to register an address book - Registration from [Ad- dress book] Select a destination type, and register destination information. Tap [Address book]. Tap [New]. Select the type of the destination you want to register. d-COLOR MF759 3-51...
  • Page 134 [Index] field. % Entry items and the number of setting screens vary depending on the destination type. For informa- tion on entry items, refer to page 3-57. Enter the fax number. Tap [Close]. 3-52 d-COLOR MF759...
  • Page 135: Using The Control Panel To Register An Address Book - Registration In Scan/Fax Mode

    Using the Control Panel to register an address book - Registration in scan/fax mode Select a destination type, and register destination information. Display the scan/fax screen. Tap [Address Reg.]. Tap [New]. Select the type of the destination you want to register. d-COLOR MF759 3-53...
  • Page 136 [Index] field. % Entry items and the number of setting screens vary depending on the destination type. For informa- tion on entry items, refer to page 3-57. Enter the fax number. Tap [Close]. 3-54 d-COLOR MF759...
  • Page 137 This is used as an index of a registered destination. Tap the Index key to narrow down a target desti- nation. If [Favorite] is selected as an index, the destination appears in the basic screen of the transmission screen after it has been registered in the address book; enabling the user to easily select a destination. d-COLOR MF759 3-55...
  • Page 138: Using A Computer To Register A One-Touch Destination

    % If the login screen appears, enter the required items, then click [Login]. Select [Store Address] - [Address Book] and click [New Registration]. Select the type of the destination you want to register, and enter the required information such as the name, fax number, and index. 3-56 d-COLOR MF759...
  • Page 139: Information Required To Register A Destination

    Enter the user ID required to log in with WebDAV. [Password] Enter the password required to log in with Web-DAV. [Host Address] Enter the address of the WebDAV serv- [File Path] Enter the directory to be used as the destination. d-COLOR MF759 3-57...
  • Page 140: Registering A Group

    % For [Name], enter the destination name using the displayed keyboard. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap [Index]. 3-58 d-COLOR MF759...
  • Page 141 % [Index]: Searches for the target destination name using an index. % [Registration Number]: Searches for the target destination using a registration number. Repeat Step 4 until you select all address books to be grouped. d-COLOR MF759 3-59...
  • Page 142: Retrieving A Registered Destination

    Retrieve an address book or group to specify it as a destination to which data is sent. Retrieving a destination Tap [Scan/Fax]. The destinations, which are categorized into [Favorite] when registering indexes, are displayed on the basic screen. 3-60 d-COLOR MF759...
  • Page 143: Specifying A Destination

    Retrieves destination candidates by the prefix search function using the name (registered destination name) or address (fax number, E-mail ad- dress, or computer name). This function is convenient when there are too many registered destinations. Reference For details, refer to the User's Guide CD/DVD. d-COLOR MF759 3-61...
  • Page 144: Using A Usb Memory Device

    Insert a USB memory device into the USB port of the machine. NOTICE Use the USB connector on the side that is near the Control Panel. Do not use a USB device other than a flash-memory device. Tap [Print a document from External Memory.]. 3-62 d-COLOR MF759...
  • Page 145 Using a USB memory device Select data to be printed, and tap [Print]. Check print settings. Press the Start key. NOTICE Do not disconnect the USB memory device during data printing. d-COLOR MF759 3-63...
  • Page 146: Saving The Scanned Data In The Usb Memory Device (External Memory)

    Change the settings to save documents in the USB memory device. Tap [Utility], and select [Administrator Settings] - [System Settings] - [User Box Settings]. % For information on the default administrator password, refer to the User’s Guide CD/DVD. Tap [External Memory Functional Settings]. 3-64 d-COLOR MF759...
  • Page 147: Saving Data In The Usb Memory Device

    Saving data in the USB memory device Load the original. Connect a USB memory device to this machine. NOTICE Use the USB connector on the side that is near the Control Panel. Do not use a USB device other than a flash-memory device. d-COLOR MF759 3-65...
  • Page 148 Using a USB memory device Tap [Save a document to External Memory.]. Check the file name. 3-66 d-COLOR MF759...
  • Page 149 For details on using the separate scan function, refer to the User's Guide CD/DVD. Press the Start key. NOTICE Do not disconnect the USB memory device during data saving. d-COLOR MF759 3-67...
  • Page 150: Using The Guidance Function

    If you have any questions during operation, try to use this guidance function. Getting help on the currently displayed screen: Select [Function] on the Help Menu to display the guidance screen. Press the Guidance key (default: Register key 2). Select a menu. 3-68 d-COLOR MF759...
  • Page 151 Using the guidance function Narrow down the information you want to know. d-COLOR MF759 3-69...
  • Page 152: Getting Help On The Desired Function Or Procedure

    Returns to the preceding screen. Getting help on the desired function or procedure: Open the Help Menu, and select a menu depending on an objective to display the guidance screen. Press the Guidance key (default: Register key 2). Select a menu. 3-70 d-COLOR MF759...
  • Page 153 Using the guidance function Narrow down the information you want to know. d-COLOR MF759 3-71...
  • Page 154: Help Menu List

    [Service/Admin. Information] Tap this button to display the service or administrator information, ad- ministrator name, extension number, and E-mail address. [Consumables Replace/Pro- Tap this button to check how to replace consumables or dispose of cessing Procedure] punch scraps. 3-72 d-COLOR MF759...
  • Page 155: Using The [Quick Security] Function

    [PSWC Setting] Select whether to use Web Connection. [Security Warning Display Select whether to display the security warning screen if the adminis- Setting] trator password remains set to the default or if password rules are not satisfied. d-COLOR MF759 3-73...
  • Page 156 [Utility], and select [Administrator Settings] - [System Settings] - [Custom Display Set- tings] - [Main Menu Default Settings] - [Main Menu Key]. For information on the default administrator password, refer to the User’s Guide CD/DVD. Reference For details, refer to the User's Guide CD/DVD. 3-74 d-COLOR MF759...
  • Page 157: Advanced Functions

    Advanced Functions...
  • Page 159: Using Advanced Functions

    You can use the address book for personal use (My Address Book). • This requires the association with My Panel Manager. In addition, this machine supports advanced functions such as the barcode font, unicode font, and OCR font. d-COLOR MF759...
  • Page 160: Association With Application

    % Enter the license code to enable the function. For details, refer to page 4-8. Configuring each function (Administrator) % Configure the required settings for each advanced function. For details, refer to page 4-9. Reference For details on the procedure, refer to the User's Guide CD/DVD. d-COLOR MF759...
  • Page 161: Enabling The I-Option Function

    % For information on the default administrator password, refer to the User’s Guide CD/DVD. Enter the token number shown in the token certificate. Select [Yes], then tap [OK]. This machine is connected to the Internet to communicate with the License Management Server (LMS), and it restarts automatically. d-COLOR MF759...
  • Page 162: Registering The I-Option License

    % Prepare at hand the printed serial number, request code, and token certificate supplied with i-Op- tion. Access the Web site of the License Management Server (LMS). Enter the [MFP Serial Number] and [Re- quest Code], then click [Next]. % The URL is https://licensemanage.com/index.aspx. d-COLOR MF759...
  • Page 163 You could also store them in your USB memory device. The license code input could be omitted by using a USB memory device to achieve a convenient operation. When using a USB memory device, insert the USB memory device and click [Download] to store the license code. d-COLOR MF759...
  • Page 164: Enabling The I-Option Function Using The License (Administrator)

    Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License] - [Function/Licence Code]. % For information on the default administrator password, refer to the User’s Guide CD/DVD. Enter the license and function codes you wrote down. Select [Yes], then tap [OK]. This machine restarts automatically. d-COLOR MF759...
  • Page 165: Configuring Each Function

    Select [Yes], then tap [OK]. This machine restarts automatically. Configuring each function Configure the required settings for each advanced function. Reference For details on the required setting items for each advanced function, refer to the User's Guide CD/DVD. d-COLOR MF759...
  • Page 166: Using The Web Browser Function

    % Register the license on a dedicated Web site. For details, refer to page 4-12. Enabling the Web browser using the license (Administrator) % Enter the license code to enable the function. For details, refer to page 4-13. 4-10 d-COLOR MF759...
  • Page 167: Operation Flow

    % For information on the default administrator password, refer to the User’s Guide CD/DVD. Select [ON], then tap [OK]. This machine is connected to the Internet to communicate with the License Management Server (LMS), and it restarts automatically. d-COLOR MF759 4-11...
  • Page 168: Registering The License

    Write down the serial number of this machine. Access the Web site of the License Management Server (LMS). Enter the [MFP Serial Number], then click [Next]. % The URL is https://licensemanage.com/activate. Check the message, then click [OK]. 4-12 d-COLOR MF759...
  • Page 169: Enabling The Web Browser Using The License

    By inputting the codes Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser Settings] - [Web Browser Usage Settings]. % For information on the default administrator password, refer to the User’s Guide CD/DVD. d-COLOR MF759 4-13...
  • Page 170 Using the Web browser function Select [ON], then tap [OK]. When the screen shown below appears, tap [Function/License Code]. Enter the license code you wrote down. 4-14 d-COLOR MF759...
  • Page 171 Select [Yes], then tap [OK]. This machine restarts automatically. By using a USB memory device Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser Settings] - [Web Browser Usage Settings]. Select [ON], then tap [OK]. d-COLOR MF759 4-15...
  • Page 172 Using the Web browser function Wait a few moments until the screen shown below appears. Connect the USB memory device stored with the license code. Select [Install License from Ext. Memory]. 4-16 d-COLOR MF759...
  • Page 173: Starting The Web Browser

    The target page appears. Tips Selecting [Menu] - [Display] allows you to zoom in and out from a page or change the character code. Selecting [Menu] - [Tab] allows you to open a new tab and display a different page. d-COLOR MF759 4-17...
  • Page 174: Printing The Currently Displayed Page Or The Linked File

    [Simplex/Duplex] Select whether to print one side or both sides of sheets of paper. To specify 2-sided printing, select the binding position. [Finishing] Configure the offset, punch, or staple setting for output paper. Press the Start key. 4-18 d-COLOR MF759...
  • Page 175: Troubleshooting

    Troubleshooting...
  • Page 177: Main Messages And Remedies

    For Waste Toner Box: When the message [Waste Toner Box needs to be replaced.] appears, replace it based on the maintenance contract. Contact your service representative if the messages continue to appear even after replacement or cleaning has been carried out. d-COLOR MF759...
  • Page 178: When A Paper Jam Message Persists

    If a defective part can be separated in order to be able to continue operations after a problem has been de- tected, [Continue] or [Recover Data] is displayed. To continue operations, select any key. However, the prob- lem has not been resolved, so contact your service representative immediately. d-COLOR MF759...
  • Page 179: When [Stabilizing Image.] Appears

    In case image stabilization does not finish after a short while, contact your service representative. NOTICE You cannot interrupt or prohibit image stabilization. Reference To perform image stabilization on a voluntary basis, refer to the User's Guide CD/DVD. d-COLOR MF759...
  • Page 180: When Printing Quality Has Deteriorated

    Printing quality deteriorates if the Print Head Glass is dirty. If this occurs, clean the Print Head Glass ac- cording to the following procedure. Pull out Tray 2. Remove the Printhead Cleaner from Tray 2. Open the Lower Front Door of the machine. d-COLOR MF759...
  • Page 181 % Repeat this operation approximately three times for all the Print Head Glass sections. Install the Waste Toner Box. Close the Lower Front Door of the machine. Place back the Printhead Cleaner to Tray 2. Close Tray 2. d-COLOR MF759...
  • Page 182: When The Machine Cannot Be Powered On

    Check whether the power plug of this machine is firmly plugged into the power outlet. Also check that the breaker has not tripped. Check to see that the Main Power Switch and the Power key are turned ON. In case the machine cannot be powered on even after checking, contact your service representative. d-COLOR MF759...
  • Page 183: When The Touch Panel Is Not Visible

    Auto Power off mode, press the Power key to display the Touch Panel. To use it outside the preset operating hours, follow the on-screen instructions. Check to see that the Main Power Switch and the Power key are turned ON. In case the Touch Panel does not appear even after checking it, contact your service representative. d-COLOR MF759...
  • Page 184: When A Message Appears To Replace Consumables Or Carry Out Cleaning

    For details on how to replace a staple cartridge when [Replace the Staple Cartridge. ] is displayed, refer to page 5-17. For details on how to replace a saddle staple cartridge when [Replace the Saddle Staple Cartridge 1 or 2. ] is displayed, refer to page 5-19. 5-10 d-COLOR MF759...
  • Page 185: When The Punch Scrap Box Is Full

    Take action while referring to the label inside the machine. When toner is running out in the Toner Cartridge When it is almost time to replace a Toner Cartridge, an advanced warning message appears. Prepare a re- placement Toner Cartridge based on the maintenance contract. d-COLOR MF759 5-11...
  • Page 186: When It Is Time To Replace A Toner Cartridge

    The settings by the service representative are required to display a message about Imaging Unit. For details, contact your service representative. When it is time to replace an Imaging Unit of a color other than black, printing can be forcibly continued using black. Tap [Continue], and then select a desired print job. 5-12 d-COLOR MF759...
  • Page 187: When The Waste Toner Box Is Full

    When the Waste Toner Box is full When the Waste Toner Box is full, a message appears to prompt you to replace it (at replacement by user). Tap [Start Guidance], then follow the displayed guidance to take an action. d-COLOR MF759 5-13...
  • Page 188: Replacing A Toner Cartridge

    If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek medical advice if irritation persists. If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec- essary. 5-14 d-COLOR MF759...
  • Page 189: Replacing A Waste Toner Box

    If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek medical advice if irritation persists. If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec- essary. d-COLOR MF759 5-15...
  • Page 190: Replacing An Imaging Unit

    If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek medical advice if irritation persists. If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if nec- essary. 5-16 d-COLOR MF759...
  • Page 191: Replacing A Staple Cartridge

    Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no sheets will be stapled. NOTICE Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is removed before the relevant message appears, it may result in a failure. d-COLOR MF759 5-17...
  • Page 192: Finisher Fs-536/Finisher Fs-536 Sd

    Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no sheets will be stapled. NOTICE Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is removed before the relevant message appears, it may result in a failure. 5-18 d-COLOR MF759...
  • Page 193: Replacing A Saddle Staple Cartridge

    When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get caught in the machine. Be sure to replace the Saddle Staple Cartridge after the relevant message has appeared. If a Saddle Staple Cartridge is removed before the relevant message appears, it may result in a failure. d-COLOR MF759 5-19...
  • Page 194: Finisher Fs-536 Sd

    When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get caught in the machine. Be sure to replace the Saddle Staple Cartridge after the relevant message has appeared. If a Saddle Staple Cartridge is removed before the relevant message appears, it may result in a failure. 5-20 d-COLOR MF759...
  • Page 195: Index

    Index...
  • Page 197 Loading Paper 2-33 2-34 2-36 2-37 Low Power mode 2-21 Main Menu 2-24 MFP 2-10 Multi-job 2-32 Options 2-7 2-12 PC-Fax TX 3-42 PCL 3-5 Power Save mode 2-21 Print Function 3-3 Printing from a USB memory device 3-62 d-COLOR MF759...
  • Page 198 MF759...

Table of Contents