Elitegroup Computer Systems K7S5A+ Manual page 40

IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four
items let you assign which kind of PIO (Programmed Input/Output) is used by
IDE devices. Choose Auto to let the system auto detect which PIO mode is
best, or select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UltraDMA (Auto)
Each IDE channel supports a master device and a slave device. This main-
board supports UltraDMA technology, which provides faster access to IDE
devices.
If you install a device that supports UltraDMA, change the appropriate item on
this list to Auto. You may have to install the UltraDMA driver supplied with this
mainboard in order to use an UltraDMA device.
IDE Burst Mode (Enabled)
This option, when enabled will instruct the system to send every write transac-
tion to the write buffer. Burstable transactions then burst onto the PCI bus and
nonburstable transactions do not.
Press <Esc> to return to the Integrated Peripherals screen.
SIS OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
SIS-7012/7018 AC97Audio
SIS-7013 S/W Modem
IDE ACCESS INTERFACE
USB1 ACCESS INTERFACE
USB0 ACCESS INTERFACE
AC97 ACCESS INTERFACE
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
SIS-7012/7018 AC97 AUDIO (Enabled)
Enables and disables the onboard audio chip. Disable this item if you are go-
ing to install a PCI audio add-on card.
SIS-7013 S/W Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going
to install an external modem.
IDE ACCESS INTERFACE (Embedded BUS)
This item determines whether the IDE access interface is the PCI bus or the
embedded bus.
SIS OnChip PCI Device
[Enabled]
[Enabled]
Menu Level
[Embedded BUS]
[Embedded BUS]
[Embedded BUS]
[Embedded BUS]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
36
Item Help
F1:General Help