Recommendations For Users; Warranty - Hanna Instruments HI99111 Instruction Manual

Recommendations
for users

Warranty

HI99111 is warranted for two years against defects
in workmanship and materials when used for its
intended purpose and maintained according to
instructions. Electrodes and probes are warranted
for a period of six months. This warranty is limited
to repair or replacement free of charge. Damage
due to accidents, misuse, tampering or lack of
prescribed maintenance is not covered.
If service is required, contact your local Hanna
Instruments Office. If under warranty, report the
model number, date of purchase, serial number
(see engraved on the back of the meter) and
the nature of the problem. If the repair is not
covered by the warranty, you will be notified
of the charges incurred. If the meter is to be
returned to Hanna Instruments, first obtain a
Returned Goods Authorization number from
the Technical Service department and then
send it with shipping costs prepaid. When
shipping any meter, make sure it is properly packed
for complete protection.
Hanna Instruments reserves the right to modify the design,
construction or appearance of its products without advance notice.
Before using this product, make
sure it is entirely suitable for your
specific application and for the
environment in which it is used. Any
variation introduced by the user to
the supplied equipment may degrade
the meter's performance. For yours
and the meter's safety do not use
or store the meter in hazardous
environments.