Directions For Using The Sauna - Magnum Original Series Use And Installation Manual

Use and installation manual for a MAGNUM sauna stove
Section II.6






Quality requirements for the heating water
Water condition:
Water containing humus
Water containing iron
Hardness: the most important
substances are manganese
(Mn) and chalk or calcium
(Ca)
Water containing chloride
Seawater
-----------------------------------------------------------------------------------------------------------------------
Starsauna Oy
Pistotie 4
15860 Hollola, Finland

Directions for using the sauna

Heat the sauna stove once before taking it into use, as the protective
substances in the new stones may give off odors while the sauna stove is
heating. Ensure sufficient ventilation.
The recommended temperature is 55-70 degrees.
The sauna stove heats to a proper sauna temperature in approximately 25 –
50 minutes, depending on the size of the sauna stove, the size of the sauna
and the ventilation.
Use water that is suitable for domestic use when throwing water on the
stove for heating the sauna.
Do not throw water on the stove if there are people next to it, as the water
splashing from the sauna stove and the steam it creates are burning hot.
Move carefully in the sauna, as the floors may be slippery.
Effect:
Color, taste, deposits
Color, odor, taste, deposits
Deposits
Health risk
Fast corrosion
RC Installation Template, cut out from here.
16.06.2015 9
Recommendation:
<12 mg/l
<0.2 mg/l
Mn: <0.05 mg/l
Ca: <100 mg/l
Use is banned
Use is banned
Technical support:
info@magnumkiuas.fi