Installation Of The Sauna Stove - Magnum Original Series Use And Installation Manual

Use and installation manual for a MAGNUM sauna stove
III.Installation of the sauna stove







Sauna stove
Magnum 6.6
Magnum 9
Magnum 10.5
Starsauna Oy
Pistotie 4
15860 Hollola, Finland
The electrical installation may only be performed by a qualified
electrician.
Instructions for electrical installation are provided in the circuit
diagram in these installation directions and on a sticker in the
sauna stove.
The electrical installation work may only be performed by an
electrician qualified for the job in accordance with applicable
regulations.
The sauna stove is connected to the power grid semi-permanently with
H07RN-F or similar rubber cable.
Check the required cable dimensions in the table below.
Note: the use of a PVC cable as a connection cable is not allowed.
The power switch in the device is a so-called control switch and does not
fully de-energize the sauna stove.
Table
POWER FUSE
6.6 KW 3x10 A
9 KW 3x16 A
10.5 KW 3x16 A
16.06.2015 10
SIZE OF THE
FEED CABLE
SAUNA
5x1.5 mm2 5-9 m3
5x2.5 mm2 8-15 m3
5x2.5 mm2 10-20 m3
Technical support:
info@magnumkiuas.fi