Table of Contents
Advertisement
Use and installation manual for a MAGNUM sauna stove
I.Using the device - Finlandia Control Center
Section I.1
Control Center
Legend for the parts of the control panel:
1.
On/off button.
set, pressing this button starts the timer for heating the sauna.
Tip: Pressing this button for a longer duration overrides the timer and starts the heating
of the sauna immediately.
Menu button. By pressing this you can move through the menus of the device as follows:
2.
(Default mode –> Target temperature –> Heating time –> Timer –> Default mode)
(˅) button. This button is used to decrease the default values.
3.
(˄) button. This button is used to increase the default values.
4.
Lights button. By pressing this, you can turn on the sauna stove's light. Pressing it again
5.
turns the light off. (Only used in models with lights or a separate fiber kit)
"Device on" light. This light is constantly on while the sauna stove is on.
6.
The light "glows" when the timer is in use. The light is turned off when the sauna stove is not
on.
Sauna stove light's indicator light. This light is on as an indicator of the fiber light kit of the
7.
sauna stove / sauna being on.
Menu settings indicator light. This light comes on when a menu setting is adjusted (timer,
8.
time the device is on, target temperature of the sauna stove)
Three-digit display
9.
Starsauna Oy
Pistotie 4
15860 Hollola, Finland
Pressing this button turns the sauna stove on and off. If the timer has been
16.06.2015 4
Control functions - Finlandia
Sauna stove On/Off
Menu
Decrease
Increase
Lights button
The heating/timing indicator light
Sauna stove light's indicator light
Menu settings indicator light
Number display
Technical support:
info@magnumkiuas.fi
Advertisement
Table of Contents
