The Sauna Stove's Wall Condector - Magnum Original Series Use And Installation Manual

Use and installation manual for a MAGNUM sauna stove
4.5 Sauna stove wall bracket
1. Fit the brackets to the sauna stove/wall before attaching to the wall. In Lite/Original/Cenik
sauna stoves, the bracket can be installed to the outer edge or between the vertical profile;
in Ruutu sauna stoves, anywhere between the squares.
2. Bend the brackets, if necessary. PLEASE NOTE: if you are bending the brackets by hand,
use protective gloves.
3. When the bracket seems to be positioned well, mark the attachment points on the wall.
4. Drill a small starting hole at the mark, so that the panel would not crack during the screwing
process.
5. Place the brackets to the hollows of the upper part of the sauna stove, according to the
image, and screw the brackets to the wall.
Finish piling the sauna stove with stones. The brackets will be covered by the stones.
6.
Starsauna Oy
Pistotie 4
15860 Hollola, Finland
16.06.2015 20
Technical support:
info@magnumkiuas.fi