Trane CenTraVac Duplex CDHF Operation & Maintenance Manual page 44

Chiller
Description
1. Front Panel Control Type
2. Front Panel Chilled Water Setpt
3. Front Panel Hot Water Setpt
4. Front Panel Current Limit Setpt
5. Front Panel Base Load Cmd
6. Front Panel Base Load Setpt
7. Front Panel Ice Build Cmd
8. Front Panel Ice Termn Setpt
9. Ice to Normal Cool Timer Setpt
10. Differential to Start
11. Differential to Stop
12. Setpoint Source
*Follows hierarchy of selection from left to right (except for ice building which is "OR" logic).
Feature Settings
Description
1. Chilled Water Reset
2. Return Reset Ratio
3. Return Start Reset
4. Return Maximum Reset
5. Outdoor Reset Ratio
6. Outdoor Start Reset
7. Outdoor Maximum Reset
8. Ext Chilled Water Setpoint
9. Ext Current Limit Setpoint
10. Ice Building Feature Enable
11. Ext Base Loading Setpoint
44
Operator
Interface
Resolution or (Enumerations), Default
(Chilled Water, Hot Water), Chilled Water
(3)
+ or – XXX.X
(3)
+ or – XXX.X
XXX (4)
On/Auto
XXX
On/Auto
XXX.X
(0-10), 5 min
XXX.X
XXX.X
*(BAS/Ext/FP , Ext/ Front Panel, Front Panel),
BAS/Ext/FP Default
Resolution or (Enumerations), Default
(Constant, Outdoor, Return, Disable), Disable
XXX
XXX.X
XXX.X
XXX
XXX.X
XXX.X
(Enable, Disable), Disable
(Enable, Disable), Disable
(Enable, Disable), Disable
(Enable, Disable), Disable
Units
Enum
Temperature
Temperature
Percent RLA
enum
Percent
Enum
Temperature
Minutes
Temperature
Temperature
Enum
Units
Enum
Percent
Temperature
Temperature
Percent
Temperature
Temperature
Enum
Enum
Enum
Enum
CDHF-SVU01C-EN