Trane CenTraVac Duplex CDHF Operation & Maintenance Manual page 36

Main Screen Data Fields Table
Description
1. Chiller Mode (>> submodes)
2. Circuit 1 Mode (>> submodes)
3. Circuit 2 Mode (>> submodes)
4. Evap Ent/Lvg Water Temp
5. Cond Ent/Lvg Water Temp
6. Active Chilled Water Setpoint (>>source)
7. Active Hot Wtr Setpoint (>>source)
8. Active Current Limit Setpoint (>>source)
9. Active Base Loading Setpoint (>>source)
10. Circuit 1 Purge Mode (status, i.e. on, off,
adaptive, auto))
11. Circuit 2 Purge Mode (status, i.e. on, off,
adaptive, auto))
12. Approx Chiller Capacity
13. Active Ice Termination Setpoint (>>source)
14. Software Version
36
Operator
Interface
Main Screen
The main screen is provides "an
overall view" of the chiller
performance in addition to the main
and sub operating modes. The table
below indicates other items found ,
when specified by options, that can
be scrolled to via the up or down
arrows.
Units
F / C
F / C
F / C
F / C
% RLA
%
See modes in
purge manual
See modes in
purge manual
Tons / kW
F / C
Chiller Operating Mode
The machine-operating mode
indicates the operational status of the
chiller. A subscreen with additional
mode summary information will be
provided by selection of an
additional information icon (>>). The
operating mode lines will remain
stationary while the remaining status
items scroll with the up/down arrow
keys.
Resolution Dependencies
0.1
0.1
0.1
0.1 If in heat installed
1
1 If enabled
Emum
Enum
XXX If option installed
0.1 If option installed
0.XX
Circuit Operating Mode
The circuit-operating modes indicate
the operational status of the circuits.
A subscreen with additional mode
summary information will be
provided by selection of an
additional information icon (>>). The
operating mode lines will remain
stationary while the remaining status
items scroll with the up/down arrow
keys.
CDHF-SVU01C-EN