Programming Procedures; Production - Classe Audio Delta Series Service Manual

Programming Procedures

Production:

The processors on the following boards need to be programmed:
AC-control
Sensor/control
Front panel
Please see Appendix F for the latest software revisions.
The Front Panel board needs to be defaulted (its memory cleared completely) immediately after its FIRST
programming (during the "group" testing of the control board assembly). Please see Appendix B.
CA(P)2100 AMP Service Manual v1.4 inc voltage change info .doc
(PIC16F819)
(PIC16F819)
(PIC18F258)
Page 8 of 50