Classe Audio Delta Series Service Manual page 38

Integrated
Table of Contents

Advertisement

chk
Snapshot of AC module and AMP module parameters.
Heatsink 1: CURRENT is Normal, Temp is Normal (or High, or WARNING Temp is VERY HIGH).
Heatsink 2: CURRENT is Normal, Temp is Normal (or High, or WARNING Temp is VERY HIGH).
Heatsink 3: CURRENT is Normal, Temp is Normal (or High, or WARNING Temp is VERY HIGH).
Heatsink 4: CURRENT is Normal, Temp is Normal (or High, or WARNING Temp is VERY HIGH).
Heatsink 5: CURRENT is Normal, Temp is Normal (or High, or WARNING Temp is VERY HIGH).
AC Setting = 120
Line Freq. = 60 Hz
Internal Temp. = 33 C
Ground is OK.
Line Phase is OK.
Line Voltage is in spec.
OK
Note: the AMP lines (first five in the example above) only appear if the amp is ON (otherwise the first line reads
"This Amplifier is OFF"). The number of AMP lines depends on the model of the amplifier (5-channel amp in
example above).
Commands available when the amp is ON
MUT
Toggles mute (see responses below)
MU0
Turns mute OFF
Mute off.
MU1
Turns mute ON
Mute on.
sda
Displays snapshot of all heatsink module parameters.
Heatsink 1: POS 0A | NEG 0A | TEMP 31C
Heatsink 2: POS 0A | NEG 0A | TEMP 30C
OK
Commands available when the amp is OFF
amp=x sets the logical amp number for power-up delay, valid data is 1 to 15.
tim
Displays the total run time data.
Total ON time = 10 days, 18 hours, 22 minutes
sfl
Displays the total number of faults, fault time, amp number and fault code. For example:
There are 7 faults recorded.
D-AMP Ver: 1.0 Copyright (c) 2003 Classe Audio
Sr No:1580006
Model: CA2100, Amp# 1
OK
AC Control: 2E, Heatsink 1: L1, Heatsink 2: L1,
#007: TT 0:00:30 | OT 0:00:00 | Heatsink 1: DC Output,
#006: TT 0:00:27 | OT 0:00:00 | Heatsink 2: Fast +POS+ Rail,
#005: TT 0:00:09 | OT 0:00:01 | AC Line Fault.
#004: TT 0:00:27 | OT 0:00:00 | Heatsink 1: Slow –NEG- Rail
#003: TT 0:00:07 | OT 0:00:00 | AC Line Fault.
#002: TT 0:00:07 | OT 0:00:00 | AC Line Fault.
#001: TT 0:00:07 | OT 0:00:01 | AC Line Fault.
CA(P)2100 AMP Service Manual v1.4 inc voltage change info .doc
OR
Mute already off.
OR
Mute already on.
Page 38 of 50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca 2100Cap 2100

Table of Contents