Advertisement
SWF EMBROIDERY MACHINE
Picture 6
─ Ver.2009 1st
5) Set the angle plate to 100 degrees. And then turn
the presser foot driving pin pulley to check that
presser foot reciprocator set smoothly moves up
and down.
6)On the menu of OP Box, select "TOOL"
→ "PF UP/DOWN" in order to up the presser foot.
5. Assemble the Arm Protection Plate
& the Side Cover
1) Assemble them in reverse of disassembly.
6.Assemble the Head
1) Assemble them in reverse of disassembly.
7.Assemble the Top Shaft Cover
1) Assemble them in reverse of disassembly.
────────────────────── SunStar Co., Ltd ─
Caution
) If the setting of the presser foot
driving cam is bad, the balance of machine is
broken and then the shaking may extremely occur.
So, the correct setting is needed.
Advertisement
