WilTec EGP Manual page 18

 Replace the rotor assembly in motor housing with caution.
 Make sure the rotor assembly is free and will turn and check the position of
the sealing ring on the pump housing.
 Plug the pump housing in the motor housing and tighten the screws uniform-
ly.
Replace the filter cover and filter sponge in the pump housing
illustration 1
Skimmer
illustration 2
illustration 3
illustration 4
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
5
8
6
min.2m/6.0feet
1
2
9
4
7
Seite 18