Preparation - ATEN CL6708MW User Manual

Single rail 8-port dvi fhd lcd kvm switch

Hide thumbs Also See for CL6708MW:

Table of Contents

CL6708MW User Manual

Preparation

To prepare for the firmware upgrade, do the following:

1. Use the Firmware Upgrade Cable provided with this unit to connect a COM

port on your computer to the Firmware Upgrade Port of your switch.

2. Shut down all the computers on the KVM installation.

3. From your KVM switch console, log into the OSD as the administrator

(see page 27) and select the F4 ADM function.

4. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to

invoke Firmware Upgrade mode (see page 36).

Table of Contents