Maintenance; Technical Data - Hyundai SI 990 Instruction Manual

VERTICAL SYSTEM
It is intensive vertical steaming for steaming of freely hanging textiles (such as hanging
clothes, draperies, hangings). Set the regulation temperature dial A5 to the marked area
for steaming (Fig. 2). As soon as the indication lamp A6 turns OFF, stretch the fabric
slightly with one hand and move the iron vertically bottom-up (Fig. 6B). Press the intensive
steaming button A4 so that you reach vertical steam hammer. Do not hold the intensive
steaming button pressed continuously and do not use it more than 5 times consecutively.
Also allow at least one minute interval before applying this burst of steam function.
WARNING
– Use the VERTICAL function only if the regulation temperature dial A5 to the ••• or
maximum position.
Storage
After finishing ironing, pour out the unused water from the container (be careful, it can be
hot), or let the rest of the water evaporate and let the iron cool down. Then turn regulator
A2 to „ " position (steam switched off). Put the iron to the rest position. For tilting the
handle you have to push lock button A11 (Fig. 5). The travel case B is for storing the
appliance.
IV. MAINTENANCE
Before every maintenance, unplug the iron from power supply by taking the fork of
the power cord out of the socket! Do not use rough and aggressive detergents
(e.g. sharp objects, peelers, pot scourers, caustic agents for cleaning or other
solvents). Wipe the entire iron with a wet cloth in the cooled state and dry up. If brown
film is created on the ironing plate (e.g. when ironing starched laundry), you can remove
the film by a detergent containing fine sand. The iron is equipped with a permanent
decalcification system ANTI CALC that does not require maintenance. But the system
cannot fully prevent creation of calcareous sediments.
V. TECHNICAL DATA
Voltage (V)
Input (W)
Water volume (volume ml.)
Weight without water (kg) about
Protection class of the appliance
Size of the product (mm)
Input in off mode is 0.00 W.
The manufacturer reserves the right to change the technical specifications and
accessories for the respective models.
Replacement of parts that require intervention in the electric part of the appliance
must be carried out by a specialized service! Failure to comply with the instructions
of the manufacturer will lead to expiration of the right to guarantee repair!
shown on the type label of the appliance
shown on the type label of the appliance
I.
199 x 91 x 75/100
24 / 30
60
0.7