Jung eNet FM 4001 M Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Jung Manuals
  4. Transmitter
  5. eNet FM 4001 M
  6. Operating instructions manual

Jung eNet FM 4001 M Operating Instructions Manual

Radio transmitter modules
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
eNet radio transmitter modules
eNet radio transmitter module 1-gang
Art. no.: FM 4001 M
eNet radio transmitter module 2-gang
Art. no.: FM 4002 M
eNet radio transmitter module 3-gang
Art. no.: FM 4003 M
eNet radio transmitter module 4-gang
Art. no.: FM 4004 M
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
The radio communication takes place via a non-exclusively available transmission path, and is
therefore not suitable for safety-related applications, such as emergency stop and emergency
call.
These instructions are an integral part of the product, and must remain with the end customer.
2
Battery safety instructions
This device or its accessories are supplied with batteries in the form of button cells.
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
ous substances may cause severe internal burns leading to death within 2 hours.
Keep new and used batteries away from children.
Do not use devices if the battery compartment does not close securely and keep away from
children.
If you suspect that a battery has been swallowed or is in any orifice of the body, seek immediate
medical attention.
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
leakage.
Do not heat or throw batteries into fire.
Do not reverse polarity, short-circuit or recharge batteries.
Do not deform or disassemble batteries.
Replace batteries only with an identical or equivalent type.
Remove empty batteries immediately and dispose of in an environmentally friendly manner.
32579243
J082579243
1 / 9
21.06.2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eNet FM 4001 M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Jung eNet FM 4001 M

Summary of Contents for Jung eNet FM 4001 M

  • Page 1 eNet radio transmitter modules eNet radio transmitter module 1-gang Art. no.: FM 4001 M eNet radio transmitter module 2-gang Art. no.: FM 4002 M eNet radio transmitter module 3-gang Art. no.: FM 4003 M eNet radio transmitter module 4-gang Art. no.: FM 4004 M Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons.

  • Page 2: Device Components

    eNet radio transmitter modules Device components Figure 1: 4-gang radio wall transmitter module Base plate Fastening screws for the base plate Design frame Wall transmitter module with adapter frame (see adapter frame assembly instructions) Fastening screws for the wall transmitter module Covers Function Intended use...
  • Page 3 eNet radio transmitter modules and then the actuator status/group status – LED turns green for 3 seconds: At least one actuator is switched on, or one Venetian blind is not in the top end position – LED remains off: All the actuators are switched off or the blinds are all in the upper end position or - if there is no status message from an actuator - a transmission error.
  • Page 4 eNet radio transmitter modules Actuators switching to the saved scene. ￭ Setting a new scene. ￭ Press scene button for longer than 4 seconds. Actuators first switching to the old scene and save the new scene after 4 seconds. Save switch-on brightness The buttons of a channel are set as channel buttons.
  • Page 5 eNet radio transmitter modules Figure 3: Cutting the adhesive pads for multiple combinations If necessary, after mounting the wall transmitter in the CD program, carefully remove the excess adhesive film in the corners. 6.1 Commissioning Insert battery Obey the battery safety instructions. ￭...
  • Page 6 eNet radio transmitter modules The button is configured as channel button and connected to the actuator. The red LED lights up for approx. 5 seconds. The radio sensor and the actuator exit the programming mode automatically. If the red LED of the radio transmitter flashes 3 times at 1-second intervals for approx. 5 seconds, then the programming operation was not successful.

  • Page 7: Disposal Of Batteries

    eNet radio transmitter modules Disconnecting connection to an actuator ￭ Carry out the same steps as when connecting (see the chapter Connecting channel but- ton to radio actuator). The status LED of the actuator flashes quickly for 5 seconds. The actuator is disconnec- ted from the radio transmitter.

  • Page 8: Parameter List

    eNet radio transmitter modules Degree of protection IP20 Transmitting range in free field typ. 100 m Radio frequency 868.0 ... 868.6 MHz Transmission capacity max. 20 mW Receiver category Parameter list The device parameters can be changed with the eNet Server. Device configuration Parameters Setting options...
  • Page 9 Art. no. ..404 TSA.. 12 Conformity Hereby Albrecht Jung GmbH & Co. KG declares that the radio system type Art.-no. FM 4001 M / FM 4002 M / FM 4003 M / FM 4004 M corresponds to the directive 2014/53/EU. You can find the full article number on the device. The complete text of the EU Declaration of Conformity is available under the Internet address: www.jung.de/ce...

This manual is also suitable for:

Enet fm 4002 mEnet fm 4003 mEnet fm 4004 m

Table of Contents