Table of Contents
Advertisement
Quick Links
ZigBee radio hand-held transmitter
ZigBee radio hand-held transmitter
Art. No. : ZLLHS4-01
Operating instructions
1 1 Safety instructions
Device components
(1) LED
The LED lights up green as long as the button is pressed.
When the functions "Individually set lights" or "Service functions" are active, the LED lights
up red.
During commissioning the LED indicates the functional state, see Chapter 4.
(2) Buttons for switching/dimming
(3) Scene buttons/functional buttons
82595215
J0082595215
1/15
28.06.2017
Advertisement
Table of Contents
Related Manuals for Jung ZLLHS4-01
Summary of Contents for Jung ZLLHS4-01
- Page 1 ZigBee radio hand-held transmitter ZigBee radio hand-held transmitter Art. No. : ZLLHS4-01 Operating instructions 1 1 Safety instructions Device components (1) LED The LED lights up green as long as the button is pressed. When the functions "Individually set lights" or "Service functions" are active, the LED lights up red.
-
Page 2: 2 Basic Functions
ZigBee radio hand-held transmitter Intended use ZigBee Light Link transmitter for operation of ZigBee Light Link compatible participants, e.g. lamps, luminaires, light bands, ballast units, adapters The transmitter can work with ZigBee Light Link devices or with systems of other manufac- turers, e.g. - Page 3 ZigBee radio hand-held transmitter 2.2 Recalling scene Scenes help you to save individual settings of one or more persons and to recall them with a single press of a button. Briefly press the corresponding scene button Ƈ to ƌ. The luminaires that belong to that scene will switch to the stored values. 2.3 Saving scene i If the scene is to be recalled from several transmitters, it must be stored separately at each transmitter.
- Page 4 ZigBee radio hand-held transmitter 3 3 Setting luminaires individually 3.1 Selecting a luminaire Briefly press the Ɔ and ƍ buttons simultaneously. LED lights up red. All luminaires that are connected to the transmitter are selected. The luminaires acknowl- edge this e.g. by short flashing. i If only a single luminaire is to be set, press the Ɔ...
- Page 5 ZigBee radio hand-held transmitter Switching: Short press on the Ɔ or ƍ button. Dimming: Long press on the Ɔ or ƍ button. The dimming process ends when the button is released. 3.3 Setting the light color Ə Selecting a luminaire, see Chapter 3.1. Setting a predefined color: press the Ƈ...
- Page 6 ZigBee radio hand-held transmitter 3.5 Setting the color temperature Ƒ Selecting a luminaire, see Chapter 3.1. Setting warm white: briefly press the Ƌ button. The color temperature is set to approx. 2700 K, which is typical for light bulbs. Setting cold white: briefly press the ƌ button. The color temperature is set to approx.
- Page 7 ZigBee radio hand-held transmitter Connect the luminaire to the new transmitter, see chapter 4.2. 4.2 Connecting a luminaire to a transmitter Press the Ɔ and ƌ buttons simultaneously until the LED flashes green. The luminaire flashes briefly. Connection in process. LED on the transmitter lights up green.
- Page 8 ZigBee radio hand-held transmitter i After 10 seconds, if no connection process is started, the transmitter will search for an open network in order to join it. LED lights up green for 3 seconds. Transmitter has been added to a network. LED flashes red quickly for 10 seconds.
- Page 9 ZigBee radio hand-held transmitter Keep the Ƈ and ƈ buttons pressed until the LED flashes green. The luminaire flashes. Resetting in process. LED lights up green; luminaire lights up. Resetting successful. LED flashes red quickly for 3 seconds. Participant could not be reset. 4.6 Deleting connections from the transmitter to the luminaires i The transmitter can store a maximum of 10 connections to luminaires.
- Page 10 ZigBee radio hand-held transmitter 4.7 Resetting the transmitter to the default setting i All connections to luminaires will be disconnected and the assignment to a network delet- Keep the Ɖ and Ɗ buttons pressed. After approx. 10 seconds, the LED flashes green. Release the Ɖ...
- Page 11 ZigBee radio hand-held transmitter Switch on the service functions. To do so, briefly press the Ƌ and ƌ buttons simulta- neously. LED lights up red. The service functions are switched on. Save luminaires or connections in the buffer memory of the transmitter, see Chapter 5.2, 5.3 or 5.4.
- Page 12 ZigBee radio hand-held transmitter 5.3 Accepting connections from another transmitter Switch on the service functions, see Chapter 5.1. On the receiving transmitter, press the ƍ and Ƌ buttons simultaneously until the LED flashes green. Start a connection process on the transmitter to be read, see Chapter 4.2. LED lights up green for 3 seconds.
- Page 13 ZigBee radio hand-held transmitter Within 2 minutes after the last button has been pressed, transfer the buffer memory to the desired transmitter, see Chapter 5.5. 5.5 Passing connections from the buffer memory to a transmitter Put the receiving transmitter in programming mode, see Chapter 4.3. Start a connection process on the sending transmitter by pressing the Ɔ...
-
Page 14: Technical Data
ZigBee radio hand-held transmitter After 10 seconds, the LED flashes green rapidly: The transmitter is searching for an update. The LED flashes red: update in process. The LED flashes green for 3 seconds: update successful. The LED flashes red rapidly for 10 seconds: update not successful. i To cancel the update, press any button. -
Page 15: Fcc Notice
350 Fifth Avenue, Suite 5220 New York, NY 10118 Phone: +1 800.311.6135 Email: sales@jungcontrols.com www.jungcontrols.com For the product warranty, please refer to the attached document. All rights reserved © ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY 82595215 15/15 28.06.2017 J0082595215...
Need help?
Do you have a question about the ZLLHS4-01 and is the answer not in the manual?
Questions and answers