Function Setting - Jadever JWI-700D Series Manual

Method2: Press
MR/
Press
-/ OLD/
H LO
-/ OLD/
H LO
4. When the window is showing "DIV", press
to return.
5. When the window is showing "accura", press
Method1: Press
M+/SAVE
to save and return.
Method 2: Press
leftward or rightward. Press
M+/SAVE
to save and return.
ZERO/ESC
6. Press

5-2 Function Setting

1. Press and hold
mode to enter function setting. The window displays "check". Setting item "P00" displays
momentarily at the left bottom
MR/
2. Press or
M-/SET
3. Press
MR/
4. Press or
M+/SAVE
5. Press
ZERO/ESC
6. Press
ZERO/ESC
7. Press
M-/SET
to free-set the resolution. Press
TARE/
or to shift key leftward or rightward. Press
to change the value. When move to the right-most, press
to move the decimal point. Press
MR/ TARE/
or
M-/SET
to free-set the resolution. Press
+/PRINT/HI
to return to normal weighing mode.
M-/SET
while powering on or long press
TARE/
to shift between the functions
to enter the function parameter setting.
TARE/
to shift between the function parameters
to save and return to higher option
to return to higher option without saving.
to return to normal weighing mode.
M+/SAVE
M-/SET
to check the division. Press
M-/SET
to enter resolution setting.
to choose the general used resolution. Press
-/ OLD/
H
or
JWI-700D/700S
UNIT
to choose the weighing unit
+/PRINT/HI
+/PRINT/HI
to save and return.
MR/ TARE/
or
LO
to change the value. Press
M-/SET
under normal weighing
or
or
ZERO/ESC
to shift key
8