Operation; Weighing; Tare - Jadever JWI-700D Series Manual

to complete. "
M+/SAVE
6. Press
mode.

Operation

7.

7-1 Weighing

Begin with no load on the scale, the display reading zero. Place item(s) to be weighed on the
scale. The display shown is the gross weight.（The desired weighing unit should be selected
before weighing.）

7-2 Tare

Manual Tare
When weighing a sample that must be held in a container, tare stores the container weight into
memory.
1. Under the weighing mode, place the container on the weighing pan, wait till stable symbol
appears, then press the key
2. Place the item(s) to be weighed into the container. The weight displayed is the net weight.
3. Remove all items from the weighing pan; the screen displays the tare value.
4. To clear tare with an empty pan, press down key
Preset Tare
1. Long press key
"appears at the left bottom.
to save. After the window displays "
TARE
→
TARE
for 3 seconds. The scale is now in digital inputting mode with the
→
The container is tared
.
TARE
JWI-700D/700S
", it will return to normal weighing
.
ZERO/ESC
or key
12