Check Weighing - Jadever JWI-700D Series Manual

left-most digit blinking.
MR/
2. Press or
-/ OLD/
H LO
0.500kg
M+/SET
3. Press key
4. Put the load on the container, the scale will automatically deduct the value of the container
from the total value.
5. To clear tare with an empty pan, press down key

7-3 Check Weighing

Lower limit setting
1. Begin by pressing down key
left-most digit blinking.
2. To set the value of lower limit, press
rightwards; Press
M-/SET
3. Press
M+/SAVE
4. Press
Upper limit setting
1. Begin by pressing down key
left-most digit blinking.
2. To set the value of lower limit, press
TARE/
to move the key leftwards or rightwards; Press
to change the value. E.g. here we set the Preset Tare value as
to save and return to weighing mode.
-/
H
+/PRINT/HI
or
to enable / disable the check weighing function
to save the Lower limit and return to weighing mode
+/PRINT/HI.
TARE
OLD/
LO.
It is now in digital inputting mode with the
MR/ TARE/
or
-/ OLD/
H LO
to change the value.
It is now in digital inputting mode with the
MR/ TARE/
or
JWI-700D/700S
ZERO/ESC
or key
to move the key leftwards or
to move the key leftwards or
+/PRINT/HI
or
13