Parameterization and commissioning
Step 4: The test was successful, if the following dialog box appears (Fig. KS2000: Confirmation of
successful communication test). Click OK to close the dialog box.
Fig. 58: Confirmation of successful communication test
Step 5: Click OK to accept the set value (Fig. KS2000: "ADS" tab, entering the AmsServerNetID).
Step 6: Log into the KS2000 system (see also KS2000 Documentation). Parameterization can now be
carried out according to the Bus Terminal configuration. Further information can be found in the associated
terminal documentation.
BK11x0, BK1250
Version: 4.1
79