Fig. 14 "Coe Online " Tab - Beckhoff BK11 0 Series Documentation

Basic principles
• 0x4000: In some EtherCAT devices the channel parameters are stored here (as an alternative to the
0x8000 range).
• 0x6000: Input PDOs ("input" from the perspective of the EtherCAT master)
• 0x7000: Output PDOs ("output" from the perspective of the EtherCAT master)
Availability
Not every EtherCAT device must have a CoE list. Simple I/O modules without dedicated
processor usually have no variable parameters and therefore no CoE list.
Note
If a device has a CoE list, it is shown in the TwinCAT System Manager as a separate tab with a listing of the
elements:
Fig. 14: "CoE Online " tab
The figure above shows the CoE objects available in device "EL2502", ranging from 0x1000 to 0x1600. The
subindices for 0x1018 are expanded.
Data management and function "NoCoeStorage"
Some parameters, particularly the setting parameters of the slave, are configurable and writeable. This can
be done in write or read mode
• via the System Manager (Fig. "CoE Online " tab) by clicking
This is useful for commissioning of the system/slaves. Click on the row of the index to be
parameterised and enter a value in the "SetValue" dialog.
• from the control system/PLC via ADS, e.g. through blocks from the TcEtherCAT.lib library
This is recommended for modifications while the system is running or if no System Manager or
operating staff are available.
If slave CoE parameters are modified online, Beckhoff devices store any changes in a fail-safe manner in the
EEPROM, i.e. the modified CoE parameters are still available after a restart. The situation may be different
with other manufacturers.
An EEPROM is subject to a limited lifetime with respect to write operations. From typically 100,000 write
operations onwards it can no longer be guaranteed that new (changed) data are reliably saved or are still
readable. This is irrelevant for normal commissioning. However, if CoE parameters are continuously changed
22 Version: 4.1 BK11x0, BK1250