Parameterization and commissioning
Process output image
The control word (CW) is located in the output process image, and is transmitted from the controller to the
terminal.
Word-Offset
High byte
15
14 13 12 11 10 9
0
Control
1
KL3062
Dummy for Word alignment
(non-
2
Register communication data channel 1
digital)
3
Dummy for Word alignment
4
Register communication data channel 2
5
Digital
terminals
6.5
KS2000 configuration software
6.5.1
Example: parameterization with the KS2000 configuration
software
The KS2000 software tool is used for planning, parameterization, and commissioning Bus Couplers and Bus
Terminals. It can be downloaded from the Beckhoff website under KS2000 Update.
Help for installation and operation is available under KS2000 Documentation in the download area.
Fig. 53: Configuration software KS2000
76
Low byte
8
7
Show
Disable
K-bus
Outputs
overru
n
Control byte channel 1
Control byte channel 2
Version: 4.1
6
5 4 3 2 1
KL2012
BK11x0, BK1250
0