Figure 6 Installing the device in the rack
Grounding the device
WARNING!
• Correctly connecting the grounding cable is crucial to lightning protection and EMI protection.
• Connect the grounding cable to the grounding system in the equipment room. Do not connect it
to a fire main or lightning rod.
Grounding the device by using a grounding strip
1.
Connect the grounding cable to the device.
a. Use a Phillips screwdriver to remove the grounding screw from the grounding hole in the
rear panel of the chassis.
b. Use the grounding screw to attach the ring terminal of the grounding cable to the grounding
hole and fasten the screw.
2.
Connect the other end of the grounding cable to the grounding strip. Make sure the grounding
strip is reliably grounded.
5