Installing The Device; Confirming Installation Preparations - H3C WX3800H Series Installation Manual

Installing the device

WARNING!
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C Support for permission. Otherwise, H3C will not be liable for any
consequence caused thereby.
The installation procedure is the same for the WX3800H series access controllers. This section uses
the WX3840H access controller as an example.

Confirming installation preparations

Before you install the device, verify that you have read "Preparing for installation" carefully and the
installation site meets all the requirements.
1