Alert Tab - Encom Harmony IP I/O8 User Manual

ALERT TAB

In the Alert tab you can configure your IP I/O8 to send out an alarm when an event has occurred
(either involving a setting or system change, or a situation that requires maintenance). The
different alarms and events that can be reported are shown below.
Events for which the IP I/O8 can send alarms are listed below with corresponding descriptions.
•
Override Changed – The addition or removal of an override
•
Input Changed – Change of an input connected to the IP I/O8
•
Output Changed – Change of an output connected to the IP I/O8
•
Low Battery –
• Lamp Failed –
•
A/C Lost –
•
Solar Panel Disconnected –
•
Battery Disconnected –
•
Configuration Changed – Change(s) in the IP I/O8's configuration or settings was detected
(not available in HARMONY IP I/O8)
(not available in HARMONY IP I/O8)
(not available in HARMONY IP I/O8)
(not available in HARMONY IP I/O8)
(not available in HARMONY IP I/O8)
Harmony IP I/O8 Network Monitoring & Control User Manual
20