Alert Tab - Encom Harmony Series User Manual

ALERT TAB

In the Alert tab, you can configure your Gateway Basic to send out an alarm when an event has occurred
(either involving a setting or system change, or a situation that requires maintenance). The different
alarms and events that can be reported are shown below.
Events for which the Gateway Basic can send alarms are listed below with corresponding descriptions.
Note that some of these events are self-explanatory:
•
Override Changed
•
Input Changed
•
Output Changed
•
Low Battery
•
Lamp Failed
•
A/C Lost
•
Solar Panel Disconnected
•
Battery Disconnected
•
Configuration Changed
The addition or removal of an override
(not available in Harmony Gateway Basic)
(not available in Harmony Gateway Basic)
(not available in Harmony Gateway Basic)
(not available in Harmony Gateway Basic)
(not available in Harmony Gateway Basic)
(not available in Harmony Gateway Basic)
(not available in Harmony Gateway Basic)
Change(s) in the Gateway Basic's configuration or settings
23
Harmony Gateway Basic User Manual