Installing Controlpak Tm; Technical Specifications For Installing Controlpak - Encom Harmony IP I/O8 User Manual

INSTALLING CONTROLPAK
Before you can configure your radio, you must first
have the radio connected to your computer (refer to
the previous chapter), and you must install
ControlPAK™.
The disc located in the back pocket of the Installation
Guide contains the ControlPAK™ installer. Alternatively,
you can download the most recent version from our
website at http://www.encomwireless.com. Ensure you
are using ControlPAK™ version 5.4.2 or higher.
TECHNICAL SPECIFICATIONS FOR
INSTALLING CONTROLPAK™
Minimum requirements for installing ControlPAK™ on
your PC:
• Windows XP or Windows Vista
• 1GB RAM
• 100 MB free hard drive space
• Microsoft .NET framework 2.0
Harmony IP I/O8 Network Monitoring & Control User Manual
TM
After downloading the latest version of the
ControlPAK™ software:
1. Click Setup
The ControlPAK™ Install screen appears.
2. Click Next.
The ControlPAK™ Software License Agreement
screen appears.
3. Click I agree, and then click Next.
The Upgrade/Uninstall screen appears.
4. Click Next.
The Select Directory screen appears.
5. Enter the directory in which you would
like the ControlPAK™ software to install or
click Next to accept the default directory.
The Start Copying Files screen appears.
6. Click Next.
The Setup file copies the appropriate
files to your computer, and then
registers the software.
7. Click Next, then click Finish.
The ControlPAK™ icon then appears on
your desktop.
At this point, ControlPAK™ has been successfully
installed.
8