Keysight N2894-60002 User Manual page 2

Manual Part Number
N2894-97001
July 2019
Printed in Germany
Notices
© Keysight Technologies, Inc. 2019
Keysight Technologies
1900 Garden of the Gods Road
Colorado Springs, CO 80907 USA
U.S. Government Rights
The Software is "commercial computer software," s defined
by Federal Acquisition Regulation ("FAR") 2.101. Pursuant
to FAR 12.212 and 27.405-3 and Department of Defense
FAR Supplement ("DFARS") 227.7202, the U.S. government
acquires commercial computer software under the same
terms by which the software is customarily provided to the
public. Accordingly, Keysight provides the Software to U.S.
government customers under its standard commercial
license, which is embodied in its End User License Agree-
ment (EULA), a copy of which can be found at
http://www.keysight.com/find/sweula. The license set
forth in the EULA represents the exclusive authority by
which the U.S. government may use, modify, distribute, or
disclose the Software. The EULA and the license set forth
therein, does not require or permit, among other things,
that Keysight: (1) Furnish technical information related to
commercial computer software or commercial computer
software documentation that is not customarily provided to
the public; or (2) Relinquish to, or otherwise provide, the
government rights in excess of these rights customarily
provided to the public to use, modify, reproduce, release,
perform, display, or disclose commercial computer soft-
ware or commercial computer software documentation. No
additional government requirements beyond those set
forth in the EULA shall apply, except to the extent that
those terms, rights, or licenses are explicitly required from
all providers of commercial computer software pursuant to
the FAR and the DFARS and are set forth specifically in writ-
ing elsewhere in the EULA. Keysight shall be under no obli-
gation to update, revise or otherwise modify the Software.
With respect to any technical data as defined by FAR 2.101,
pursuant to FAR 12.211 and 27.404.2 and DFARS
227.7102, the U.S. government acquires no greater than
Limited Rights as defined in FAR 27.401 or DFAR
227.7103-5 (c), as applicable in any technical data.
52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any technical data.
Warranty
The material contained in this document is provided "as is,"
and is subject to being changed, without notice, in future
editions. Further, to the maximum extent permitted by
applicable law, Keysight disclaims all warranties, either
express or implied, with regard to this manual and any
information contained herein, including but not limited to
the implied warranties of merchantability and fitness for a
particular purpose. Keysight shall not be liable for errors or
for incidental or consequential damages in connection with
the furnishing, use, or performance of this document or of
any information contained herein. Should Keysight and the
user have a separate written agreement with warranty
terms covering the material in this document that conflict
with these terms, the warranty terms in the separate agree-
ment shall control.
Safety Notices
This apparatus has been designed and tested in accor-
dance with IEC 61010-031, Safety Requirements for Mea-
suring Apparatus, and has been supplied in a safe
condition. This is a Safety Class I instrument (provided with
terminal for protective earthing). Before applying power,
verify that the correct safety precautions are taken (see the
following warnings). In addition, note the external mark-
ings on the instrument that are described under "Safety
Symbols."
CAUTION. A CAUTION notice denotes a hazard. It
calls attention to an operating procedure, practice,
or the like that, if not correctly performed or adhered
to, could result in damage to the product or loss of
important data. Do not proceed beyond a CAUTION
notice until the indicated conditions are fully under-
stood and met.
WARNING. A WARNING notice denotes a hazard. It
calls attention to an operating procedure, practice,
or the like that, if not correctly performed or
adhered to, could result in personal injury or death.
Do not proceed beyond a WARNING notice until the
indicated conditions are fully understood and met.
2