Subscribe to Our Youtube Channel
Related Manuals for Body Champ BRB835
Summary of Contents for Body Champ BRB835
- Page 1 BRB835/852/880 MAGNETIC RECUMBENT BIKE This product is intended for indoor, home use only and is not to be used in a commercial setting. OWNER’S MANUAL...
- Page 2 This page is left blank intentionally...
- Page 3 ARE NOT FOLLOWED. The diagram below highlights and reviews many of the important Safety and Warning labels also found on the unit. Please ensure any user of the unit familiarizes themselves with these Safety and Warning guidelines before use. BRB835/852/880 Page 1...
-
Page 4: General Information
Body Flex Sports, Inc. 21717 Ferrero Parkway, Walnut, CA 91789 Weight Limit Telephone: 1 (888) 266 - 6789 Fax: 1 (909) 598 - 6707 Your product is suitable for users weighing : Email: info@bodyflexsports.com 250 pounds or less BRB835/852/880 Page 2... -
Page 5: Hardware And Tool List
Pre-assembled Pre-assembled [8 pieces] Pre-assembled [4 pieces] [6 pieces] [2 pieces] Cap Nut (M8) Cap Nut (M10) [2 pieces] Pre-assembled [4 pieces] Others & Tools (Included) Tool 1 (S5) Tool 2 Lock Knob (M10) Pre-assembled [2 pieces] BRB835/852/880 Page 3... -
Page 6: Front Stabilizer Assembly
Stabilizer (#04) has height adjustable end caps for leveling of the unit. Make sure these wires are accessible and hanging out before proceeding to the next step. If they have fallen inside End caps with built-in wheels Height adjustable end cap BRB835/852/880 Page 4... - Page 7 With the help of an assistant, slide the Cushion Frame (#13) onto the trough of the Bottom Frame (#12). Secure by using the two Lock Knobs (#41) and two Washers (#36) which were previously removed . BRB835/852/880 Page 5...
- Page 8 NOTE : HAND PULSE SIGNAL After complete assembly: If the computer is not picking up your hand pulse signal (or you are getting inaccurate readings), please refer to our “Troubleshooting” section on Page 13 for other troubleshoot issues. BRB835/852/880 Page 6...
-
Page 9: Pedal Assembly
Tighten both pedals securely with Tool 2. Make sure these wires are accessible and hanging out before assembling the Front Post (#02). If they have fallen inside the tube, use a bent wire to LEFT TURN COUNTER-CLOCKWISE TURN CLOCKWISE RIGHT BRB835/852/880 Page 7... -
Page 10: Wire Connection
Being careful not to pinch any wires, slide the Front Post (#02) onto the Main Frame (#01) and secure it using the previously removed four Bolts (#32) and four Arc Washers (#33) as shown in drawing to the right. BRB835/852/880 Page 8... -
Page 11: Monitor Assembly
THE ASSEMBLY PROCESS IS NOW COMPLETE. However, for your own safety, please make sure to read this entire Owner’s Manual which includes For your safety , please visually and functionally inspect and test the unit after assembly is complete. BRB835/852/880 Page 9... -
Page 12: Computer Operation
The computer and the pulse sensors are not medical devices; information OPERATING TEMP 32°F - 104°F displayed on the computer should not be used or applied for medical reasons and STORAGE TEMP 32°F - 160°F calculations may vary from other devices. BRB835/852/880 Page 10... -
Page 13: Part Listing
Part Listing The following parts list describes all of the parts illustrated on the exploded diagram on the following page. PLEASE NOTE : Most of these parts are already pre-assembled on your unit. Hand Pulse Sensors BRB835/852/880 Page 11... -
Page 14: Exploded Diagram
: Not all of the parts and hardware you see here will be used while PLEASE NOTE you are assembling the machine because some of these items are already pre-installed. Please use this page only as a reference guide for parts and hardware. BRB835/852/880 Page 12... -
Page 15: Troubleshooting
For your safety, please do not discard this Troubleshooting sheet or the Owner’s Manual, and keep them in a place where you can easily access/refer to them at any time. If you are still having any troubleshooting issues, please contact our Customer Support for further assistance. BRB835/852/880 Page 13... -
Page 16: Safety And Maintenance
Body Flex Sports Inc. 21717 Ferrero Parkway Walnut, CA 91789 More detailed information about how to reach our CUSTOMER SUPPORT may be found on Page 2 of the Owner’s Manual under the “CUSTOMER SUPPORT” section. BRB835/852/880 Page 14... -
Page 17: Warm-Up Instructions
Keep your left leg 2. Return to the starting position slowly. straight. 2. Gently pull your right leg toward your trunk without raising your upper body. Switch leg positions and repeat. BRB835/852/880 Page 15... - Page 18 Repeat on the other leg. the muscles in your left calf hand toward the other. stretch. Switch leg positions Reverse arm positions and and repeat. repeat BRB835/852/880 Page 16...
- Page 19 This page is left blank intentionally...
- Page 20 THANK YOU FOR YOUR PURCHASE MODEL NO.: BRB835/BRB852/BRB880 Please fill in the information below and keep this manual along with your sales receipt as proof of purchase. Serial Number : Date of Purchase : Retailer : Body Flex Sports Inc.
Need help?
Do you have a question about the BRB835 and is the answer not in the manual?
Questions and answers