Settings; Operating Lock; Standard Display; Standard Menu - STIEBEL ELTRON SNE 5 t ECO Operation And Installation

OPErATION

Settings

3.1.3 Display
Backlighting
If no user action occurs for 20 seconds, the backlighting switches
off. Press any button to switch the background lighting on again.
Symbols
Symbol description
Time display:
Indication of the current time or a programmed start time.
Timer mode:
The appliance heats in accordance with the selected time pro-
gram.
Comfort mode:
The appliance maintains the set comfort temperature.
Setback mode:
The appliance maintains the selected setback temperature.
Frost protection:
The appliance is protected against frost (frost protection temper-
ature = 7 °C).
The tap and the water lines are not protected.

Operating lock

The user interface is locked.
Heating enabled:
The appliance is heating to maintain the selected set tempera-
ture.
Temperature display
Editable parameter:
The parameter shown can be changed using "+" and "–".
4. Settings
4.1 Operating lock
To lock or unlock the programming keys, press and hold "+" and
"–" simultaneously for 5 seconds.
4.2

Standard display

The standard display is continuously displayed. If no user action
is performed for longer than 20 seconds while in the menu, the
device automatically switches to the standard display.
The standard display shows the current set temperature as well
as the "Editable parameter" symbol. You can use the "+" and "–"
keys to adjust the set temperature.
If the selected set temperature corresponds to one of the values
set for the comfort, setback or frost protection temperature, the
symbol for the corresponding operating mode (comfort mode,
setback mode, frost protection) appears in the menu bar.
The set temperature can also be changed manually when in timer
mode. The changed set temperature is maintained until the next
programmed start time is reached.
www.stiebel-eltron.com
4.3

Standard menu

To access the standard menu, briefly press "Menu". You can now
call up the following menu items using the "+" and "–" buttons:
display description
Select day of the week and time
Select comfort temperature
(factory setting = 65 °C)
Select setback temperature
(factory setting = 45 °C)
Activate or deactivate (off) timer mode (Pro1, Pro2, Pro3)
To change the setting of a menu item, call up the relevant menu
item using "+" and "-". Press "OK".
As soon as the "Editable parameter" symbol appears, you can
change the setting of the menu item with "+" and "–". Press "OK"
to save the setting.
To exit the standard menu, press "Menu". The standard display
appears.
Note
During initial start-up and following prolonged power
supply interruptions (approx. 8 hours), you must set the
day of the week and the time.
4.4

Configuration menu

display description
I1-I3 Actual values
Pro1-Pro3 Time programs
P1-P5 Parameter
In the configuration menu, you can call up actual values, program
time programs for timer mode and set parameters.
To access the configuration menu, press and hold "Menu". After
approx. 3 seconds, actual value I1 is displayed.
Use "+" and "–" to switch between the individual actual values,
time programs and parameters.
To exit the configuration menu, press "Menu". The standard dis-
play appears.
4.4.1 Actual values
The following actual values can be called up:
display description
I1 Actual temperature
I2 Operating time
I3 Heating time
(counter is reset to 0 after reaching 9999)
unit
[°C] | [°F]
[d]
[h]
SNE 5 t ECO| 19