Advertisement
User manual / Bedienungsanleitung
To mount the clamping ring on a turntable in the Clearaudio Innovation series you will need
•
to mount the Unify 12 inch level base (Art. No. AC030-4).
Pic. 4: Unify 12 inch level base (Art. No. AC030-4)
2.2 Mounting the clamping ring
If the mounting of the clamping ring is necessary, please proceed as follows. Otherwise you can
proceed to point 3.
Attach the aluminium clamping ring to the clean surface of the turntable chassis using the included
M4 x 10 hex socket head cap screws and the matching hex wrench (#3).
Make sure that the clamping ring sits perfectly flat on the mounting surface.
Pic. 5: Mounting the clamping ring
Please tighten all three screws firmly (Pic. 6).
Made in Germany
Pic. 6: Fixing the clamping ring
7
Advertisement
