Gma 347 Audio Panel Controls - Garmin G950 Pilot's Manual

AUDIO PANEL AND CNS

GMA 347 AUDIO PANEL CONTROLS

1
11 12 13
When a key is selected, an annunciator in the key is illuminated.
NOTE:
Marker Beacon Annunciators – Each annunciator lights independently when flying over the associated
1
marker beacon station.
MKR/MUTE – Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver
2
audio. Unmutes automatically when new marker beacon audio is received. Enables Music Mute feature.
Also, stops play of recorded COM audio.
COM1 – When selected, audio from the #1 COM receiver can be heard.
3
COM2 – When selected, audio from the #2 COM receiver can be heard.
4
COM3 – Reserved for optional COM radio.
5
NAV1 – When selected, audio from the #1 NAV receiver can be heard.
6
NAV2 – When selected, audio from the #2 NAV receiver can be heard.
7
DME – Turns optional DME audio on or off.
8
ADF – Turns optional ADF receiver audio on or off.
9
PLAY – Press once to play the last recorded COM audio. Press again while audio is playing and the
10
previous block of recorded audio will be played. Each subsequent press plays each previously recorded
block. Pressing the MKR/MUTE Key during play of a memory block stops play.
PILOT Squelch – Turn to adjust Pilot' s squelch. The Pilots volume knob must be pressed to allow manual
11
squelch adjustment.
96
2 3 4
14 15 16 17 18
Figure 4-2 GMA 347 Audio Panel Controls
Garmin G950 Pilot's Guide for the Pilatus PC-6
5 6 7
19 20
8 9 10
21 22 23 24
190-00870-02 Rev. A
25