Garmin G950 Pilot's Manual page 253

Loading an arrival into the active flight plan from the Arrival Information Page:
1) From the Airport Information Page (first page in the WPT group), press the STAR Softkey. The Arrival Information
Page is displayed, defaulting to the airport displayed on the Airport information Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter an identifier/facility name/city, and
press the ENT Key.
3) Select a different arrival, if desired.
a) Turn the large FMS Knob to highlight the arrival. The arrival is previewed on the map.
b) Turn the small FMS Knob to view the available arrivals. Press the ENT Key to select the arrival. The cursor moves
to the Transition box (only if there are available transitions). The arrival is previewed on the map.
c) Turn the small FMS Knob to view the available transitions. Press the ENT Key to select the transition. The cursor
moves to the Runway box. The arrival is previewed on the map.
d) Turn the small FMS Knob to view the available runways. Press the ENT Key to select the runway. The cursor
moves to the Sequence box. The arrival is previewed on the map.
4) Press the MENU Key to display the Arrival Information Page Menu.
5) Turn the FMS Knob to highlight 'Load Arrival'.
6) Press the ENT Key to load the arrival procedure into the active flight plan.
REMOVING AN ARRIVAL FROM THE ACTIVE FLIGHT PLAN
When plans change while flying IFR, arrivals can be easily removed from the Active Flight Plan.
Removing an arrival from the active flight plan:
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD)
2) Press the FMS Knob, and turn to highlight the arrival header in the active flight plan.
Or :
Use the Joystick to place the Quick Select Box on the arrival header (MFD only).
3) Press the CLR Key. A confirmation window is displayed listing the arrival procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight 'CANCEL' and press the ENT
Key.
5) Press the FMS Knob to remove the flashing cursor.
Or :
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the MENU Key, and highlight 'Remove Arrival'.
3) Press the ENT Key. A confirmation window is displayed listing the arrival procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request, highlight 'CANCEL' and press the ENT
Key.
190-00870-02 Rev. A Garmin G950 Pilot's Guide for the Pilatus PC-6
FLIGHT MANAGEMENT
241