Video Setup; Display Selection - Garmin G950 Pilot's Manual

VIDEO SETUP

Video brightness, contrast, and saturation may be adjusted be selecting the setup function. While viewing
the setup function softkeys, after 45 seconds of softkey inactivity, the system reverts to the AUX - VIDEO Page
softkeys.
Adjusting the video settings:
1) With the AUX‑VIDEO Page displayed, press the SETUP Softkey.
2) Press the BRIGHT - or BRIGHT +, to adjust display brightness in five percent increments from 0 to 100%.
3) Press the CNTRST- or CNTRST +, to adjust display contrast in five percent increments from 0 to 100%.
4) Press the SAT - or SAT +, to adjust display saturationin five percent increments from 0 to 100%.
5) If desired, return the display to the default settings by pressing the RESET Softkey.
6) Press the BACK Softkey to return to the previous softkey level.

DISPLAY SELECTION

Pressing the HIDE MAP Softkey removes the map and displays video on the full screen. The softkey label
changes to grey with black characters. Pressing the HIDE MAP Softkey again restores the map view and the
small video image. The softkey label returns to white characters on a black background.
190-00870-02 Rev A
Figure 8-77 AUX - Video Split-Screen
Garmin G950 Pilot's Guide for the Pilatus PC-6
ADDITIONAL FEATURES
Video
Display
Map
View
429