Adding Waypoints To An Existing Flight Plan - Garmin G950 Pilot's Manual

FLIGHT MANAGEMENT

ADDING WAYPOINTS TO AN EXISTING FLIGHT PLAN

Waypoints can be added to the active flight plan or any stored flight plan. Choose the flight plan, select the
desired point of insertion, enter the waypoint, and it is added in front of the selected waypoint. Flight plans
are limited to 99 waypoints (including waypoints within airways and procedures). If the number of waypoints
in the flight plan exceeds 99, the message "Flight plan is full. Remove unnecessary waypoints." appears and the
new waypoint(s) are not added to the flight plan.
198
Figure 5-61 Stored Flight Plan Page
Figure 5-62 Active Flight Plan Page - FPL Full
Garmin G950 Pilot's Guide for the Pilatus PC-6
Stored Flight Plan Selected
- Memory Slot
- Comment
- Procedure Identifier
- Waypoint Identifier
- Airway Identifier
- Desired Track to Waypoint
- Distance to Waypoint
- Waypoint Altitude Constraint
Softkeys
Flight Plan Full Message
190-00870-02 Rev. A