Stormscope Lightning; Setting Up Stormscope On The Navigation Map - Garmin G950 Pilot's Manual

6.2 STORMSCOPE LIGHTNING

WARNING:
hazardous weather avoidance. Range limitations and interference may cause the system to display inaccurate
or incomplete information. Refer to documentation from the lightning detection system manufacturer for
detailed information about the system.
The following pages can display Stormscope data:
• Stormscope Page
• Navigation Map
• AUX - Video Page
The Stormscope Page is the principal map page for viewing Stormscope lightning information. To display
Stormscope data on the Navigation Map, AUX - Trip Planning Page, or any of the Nearest Pages, press the MAP
Softkey, then press the STRMSCP Softkey. These pages can also display cell or strike data using the yellow
lightning strike symbology shown in Table 6-6.

SETTING UP STORMSCOPE ON THE NAVIGATION MAP

Setting up Stormscope options on the Navigation Map:
1) On the Navigation Map Page, press the MENU Key.
2) With 'Map Setup' selected (Figure 6-22), press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. Turn the small FMS Knob to select 'Weather'),
and press the ENT Key.
4) Turn the large FMS Knob to highlight and move between the product selections.
5) When an item is highlighted, turn the small FMS Knob to select the option.
6) Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page (Figure 6-24).
190-00870-02 Rev. A
Do not rely on information from the lightning detection system display as the sole basis for
Table 6-6 Lightning Age and Symbols
Garmin G950 Pilot's Guide for the Pilatus PC-6
• AUX - Trip Planning Page
• Nearest Pages
HAZARD AVOIDANCE
311