Specifications - Makita DUR369N Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge, battery adapter and charger
Battery cartridge
Battery adapter
Charger
• Some of the battery cartridges, battery adapters and chargers listed above may not be available depending on
your region of residence.
WARNING:
Only use the battery cartridges, battery adapters and chargers listed above. Use of any
other battery cartridges,battery adapters and chargers may cause injury and/or fire.
Noise
Applicable standard : EN50636-2-91
Nylon cutting head
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Nylon cutting head
(P/N 197993-1)
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
Cutting tool
BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 /
BL1850B / BL1860B
BAP182 / BL36120A / PDC01
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Sound pressure level (L
pA
L dB(A) Uncertainty (K)
pA
dB(A)
80.6 1.7
9 ENGLISH
DUR369N
Loop handle
-1
3: 0 - 5,000 min
-1
2: 0 - 4,600 min
-1
1: 0 - 4,000 min
1,834 mm
2.4 mm
430 mm
255 mm
305 mm
D.C. 36 V
5.5 - 6.1 kg
DC18SH
) dB(A) Sound power level (L
L dB(A) Uncertainty (K)
WA
92.2
) dB(A)
WA
dB(A)
1.1