Specifications - Makita UR007GM101 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool and battery)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Cutter blade
Plastic blade (305 mm)
Nylon cutting head
Plastic blade (255 mm)
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 196895-8)
Chisel blade
(P/N 199872-9)
Nylon cutting head
(P/N 197993-1 / 191D90-9)
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
UR006G
Bike handle
225 mm
5.7 - 6.9 kg
BL4020 / BL4025* / BL4040* / BL4040F* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC / DC40WA
PDC01 / PDC1200 / PDC1500
14 ENGLISH
UR007G
Loop handle
-1
3: 0 - 7,000 min
-1
2: 0 - 5,500 min
-1
1: 0 - 4,600 min
-1
3: 0 - 5,500 min
-1
2: 0 - 5,000 min
-1
1: 0 - 4,600 min
1,815 mm
2.4 mm
255 mm
255 mm
255 mm
-
430 mm
255 mm
305 mm
D.C. 36 V - 40 V max
5.3 - 6.5 kg
IPX4