Air Conditioner Operations And Performance - Vivax ACP-18CF50AERI User Manual

Temperature indecator
Infrared signal receiver
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
Display panel
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
Display panel
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
Display panel
PRE-DEF indicator(cooling and heating
type)
Infrared signal receiver or fan only indicator(cooling only type)
Operation lamp
Timer indicator
Display panel
PRE-DEF indicator(cooling and heating
type)
Infrared signal receiver or fan only indicator(cooling only type)
Operation lamp
Timer indicator Alarm indicator
Display panel
For inverter type,this switch
purpose only,the user should not push it.
owner's manual
5
Fig. 2-4
Infrared signal
receiver
Fig. 2-5
Infrared signal receiver
Fig. 2-6
Alarm indicator Temperature
indecator
Fig. 2-7
Temporary button
Temperature indecator
Fig. 2-8
is used for after-sales
For fixed-frequency
temporarily in case you misplace the remote controller or its
batteries are exhausted. Two modes including
AUTO and FORCED COOL can be selected through the
TEMPORARY BUTTON on the air-in grill control box of the
indoor unit. Once you push this button, the air conditioner will
run in such order:
and back to FORCED
1 FORCED AUTO
The OPERATION lamp is lit, and the air conditioner will run
under FORCED AUTO mode. The remote controller operation is
enabled to operate according to the received signal.
2 FORCED COOL
The OPERATION lamp flashes, the air conditioner will turn to
FORCED AUTO after it is enforced to cool with a wind speed of
HIGH for 30 minutes. The remote controller operation is
disabled.
3 OFF
The OPERATION
while the remote controller operation is enabled.
This
Operations,
manual>> packed with the unit for details.
3. AIR CONDITIONER OPERATIONS AND
PERFORMANCE
Use the system in the following temperature for safe and
effective operation.
the air conditioner.(Cooling/Heating)
Table 3-1
Temperature
Mode
Cooling operation
Heating operation
(cooling only type without)
Drying operation
1 If air conditioner is used outside the above conditions, it may
cause the unit to function abnormally.
2 The phenomenon
conditioning
humidity in room, please close the door and window.
3 Optimum performance
operating temperature range.
service
type,this function is used to operate the unit
FORCED
FORCED AUTO, FORCED COOL, OFF,
AUTO.
lamp goes off. The air
NOTE
manual does not include
see the<<Remote
The Max operation
Outdoor
temperature
0°C ~ 50°C / 32 °F~122°F
-15°C ~ 50°C / 5 °F~122°F
(for the models with low
temperature cooling system)
-15°C ~ 24°C / 5 °F~76°F
0°C ~ 50°C / 32 °F~122°F
NOTE
is normal that the
may condense water when
will be achieved
conditioner is OFF
Remote Controller
Controller Owner's
temperature for
Room
temperature
17°C ~ 32°C
( 62 °F ~ 90°F)
0°C ~ 30°C / 32 °F~86°F
17°C ~ 32°C
( 62 °F ~ 90°F)
surface of air
the relative larger
within these