Preparation Of The Sewing Machine; How To Operate The Sewing Machine Head; How To Attach The Needles; Thread Used - JUKI APW-895N/IP-420 Basic Operation Manual

I. PREPARATION OF THE SEWING MACHINE

1. HOW TO OPERATE THE SEWING MACHINE HEAD

(1) How to attach the needles

CAUTION
:
• Turn OFF the power before starting the work so as to prevents accidents caused by abrupt start of
the sewing machine.
• When replacing the needle, be careful not to allow your fi ngers to touch the blade section of the
center knife.
❷
❷

(2) Thread used

Right hand twist thread
Left hand twist thread
Needles used are DP X 17 #14 to #18 (standard
#16). Use the specifi ed needle.
Insert left- and right-hand sides needles as far as
❶
they will go pointing their long grooves ❶ at each
other and tighten needle clamp screws ❷ .
• Use the left hand twist thread for the needle
thread.
• Either twist thread will do for the bobbin thread.
Use a new thread which is uniformly
twisted.
− 1 −