Panasonic Switch-M8eGi Product Specification page 4

Model
Switch-M8eGi
Name
Model
PN28080i-ID
No.
5. Hardware Specifications
5－4. LED display
Date issued
Date revised
Product Specification
（1）POWER（Power）LED
Green Light ：Power is ON
Off
（2）ANY COL.（Collision） LED
Orange Light : During half-duplex operation, packet collision is
（3）STATUS/ECO （Status/ECO made）LED
Green Light : Operating in status mode.
Green Blink : Operating in ECO mode.
Orange Light : Starting
Orange Blink ： Malfunction（Contact the seller）
Off
（4）GIGA（GIGA mode）LED
Green Light
（5）100M（Speed mode）LED
Green Light
（6）FULL （DUPLEX mode）LED
Green Light
（7）LOOP HISTORY（Loop History mode）LED
Green Light
Green Blink
You can display the following items using the LED display change button.
Display for the connection with a connected terminal （Status mode）,Display for
the 1000 Mbps transmission rate （GIGA mode） , Display for the 100Mbps or 10 Mbps
transmission rate （Speed mode）, Display for the full-duplex or half-duplex
transmission system （DUPLEX mode）, Display for ports with a loop history （Loop
history mode） , All port LED lamps can be turned OFF （ECO mode）.
The mode at the start is called "Base mode".
There are two types of Base modes : Status mode （factory default setting） and
ECO mode. You can change the Base mode by holding down the LED display change
button （for at least 3 sec）.
When the Base mode is changed normally, all STATUS/ECO , GIGA , 100M , and
FULL LED lamps light up at the same time. When you release the button, the Base
mode is changed to the selected mode.
If the mode is changed to the GIGA mode, Speed mode, DUPLEX mode, or
Loop History mode and the LED display switch button is not used for one minute or
longer, the mode automatically returns to a Base mode （Status mode or ECO mode）.
The Base mode is maintained even after the power is turned OFF.
May. 26, 2020
：Power is OFF
occurring in either port.
All port LEDs（left） are turned off.
: Power is OFF.
: Operating in GIGA mode.
: Operating in Speed mode.
: Operating in DUPLEX mode.
: Operating in Loop History mode.
: Loop is occurring,
or occurred within the last 3days.
Panasonic Life Solutions Networks Co., Ltd.
401-28080i-ID-SP01
Page 4 of 13
Display of each port
is refer to table 1
of No.5.
LED display change button