Panasonic Switch-M8eGi Product Specification page 11

Model
Switch-M8eGi
Name
Model
PN28080i-ID
No.
12. Prohibitions when Using the Product to Guarantee Safety
Denotes that "Death or serious injuries might be sustained".
The manufacturer assumes no responsibility for any problems occurring when the following conditions are not satisfied.
Observe the following items when using the product.
（1） Do not use power supply other than AC 100 - 240 V.
Deviation could lead to fire, electric shock, and/or equipment failure.
（2） Do not handle this Switching Hub and connection cables during a thunderstorm.
Deviation could lead to electric shock.
（3） Do not disassemble and/or modify this Switching Hub.
Deviation could lead to fire, electric shock, and/or equipment failure.
（4） Do not damage the power cord. Do not bend too tightly, stretch, twist, bundle with other cord, pinch, put under a heavy
object and/or heat it.
Damaged power cord could lead to fire, and/or electric shock.
（5） Do not handle the power cord with wet hand.
Deviation could lead to electrical shock, and/or equipment failure.
（6） Do not insert, nor drop foreign objects such as metal or combustible things into the inside from the openings or
twisted pair ports.
Deviation could lead to fire, electric shock, and/or equipment failure.
（7） Do not store or use the Switching Hub in places where it might get splashed with liquids such as water, in places with a lot of
humidity, in places with conductive dust, or in places where there are corrosive and combustible gases.
Deviation could lead to fire, electrical shock, and/or equipment failure.
（8） Do not place this Switching Hub under direct sunlight and/or high temperature.
Deviation could lead to high internal temperature and fire.
（9） Do not install this Switching Hub at the location with continuous vibration or strong shock, or at the unstable location.
Deviation could lead to falling, injury and/or equipment failure.
（10） Do not put this Switching Hub into fire.
Deviation could lead to explosion and/or fire.
（11） If the device is going to be used in high temperature environments, do not perform the following operations with bare hands.
- Relocating the installation area, transporting, and attaching, and removing attachment brackets, etc.
- Connecting and disconnecting twisted pair cables, fiber optic cables, SFP modules and console cables
- Attaching, and removing power cords
- Operating LED display change buttons
Deviation could lead to injuries or burns, etc. because of high temperatures.
（12） Do not connect equipments other than 10BASE-T/100BASE-TX/1000BASE-T to twisted pair port.
When connecting to a 10BASE-T device, use a Cat5 or above cable.
Deviation could lead to equipment failure.
（13） Do not insert any other modules into the SFP extension slots (port 9) except for
our optional SFP modules (PN54022/PN54024).
Deviation could lead to equipment failure. Check our website for the latest information on supported SFP modules.
（14） Do not connect the console ports with any other console cables except for our optional PN72001 RJ45-DSub 9-pin
console cable.
Deviation could lead to fire, electrical shock, and/or equipment failure.
Date issued
Date revised
Product Specification
May. 26, 2020
Panasonic Life Solutions Networks Co., Ltd.
401-28080i-ID-SP01
Page 11 of 13