Hardware Specifications - Panasonic Switch-M8eGi Product Specification

Hide thumbs Also See for Switch-M8eGi:
Table of Contents

Advertisement

Model
Switch-M8eGi
Name
Model
PN28080i-ID
No.

5. Hardware Specifications

5-1. Interface
5-2. Switching mode
5-3. Terminal emulator
connection
Date issued
Date revised
Product Specification
Twisted pair port 1-8
Transmitting and receiving network system:
Energy Efficient Ethernet (*2)
Transmission speed
Compatible cable
Maximum transmission distance
Auto-Negotiation
*1 Embedded power saving mode detects the connection status automatically
and saves power consumption to minimum.
Factory default : Disable
*2 Energy Efficient Ethernet (EEE) conforming to IEEE802.3az (LPI).
When there is no data transmission at link up, the energy-saving state
automatically starts so that power consumption can be reduced on each port.
Factory default : Disable
SFP extension slot 9
Transmitting and receiving network system:
SFF-8472(DMI:Diagnostic Monitoring Interface)
Optional Accessories
Switching method
Switching capacity
Packet transfer capability
MAC Address table
Buffer memory
Flow control
Aging timeout
Jumbo frame supported
Transmittable frames
HOL Blocking Prevention
Console port
Transmission mode
Emulation mode
Communication configuration
May. 26, 2020
:RJ45 connector (*1)
IEEE802.3
IEEE802.3u
IEEE802.3ab
:IEEE802.3az (LPI)
:10/100Mbps, full/half duplex
:1000Mbps, full duplex
:Twisted pair cable
(At least equivalent to EIA/TIA568 category 5e)
:100m
:Communication speed and full/half duplex
are automatically recognized.
The setting can be fixed to 10Mbps,
100Mbps, and full duplex or half duplex.
:IEEE802.3z
:1000BASE-SX SFP Module(i) (PN54022-ID)
1000BASE-LX SFP Module(i) (PN54024-ID)
:Store and Forward
:18Gbps
:Non-blocking
Max 1,488,000pps/port(1000Mbps)
Max 148,800pps/port(100Mbps)
Max 14,880pps/port(10Mbps)
:Max 8K entry/unit
:512K Bytes/unit
:half-duplex Back pressure
full-duplex IEEE802.3x
:10 to 100,000 sec. (Default: 300 sec.)
:9KB
:EAP,BPDU
:Support
:RJ45 connector 1 port
:RS-232C(ITU-TS V.24)
:VT100
:9,600bps, 8bit, None Parity control,
Stop bit 1 bit
Panasonic Life Solutions Networks Co., Ltd.
401-28080i-ID-SP01
Page 3 of 13
10BASE-T
100BASE-TX
1000BASE-T
1000BASE-SX/LX

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn28080i-id

Table of Contents