Advertisement
Operation
1. Press the power switch to turn the camera on (refer to Fig-1).
The power indicator will illuminate and the LCD will become
viewable.
2. If the image on the LCD is unclear, try adjusting either the
brightness, contrast or mirror controls on the monitor.
3. LEDs Brightness Control: The 6 levels of LED brightness
4. can be adjusted by pressing the LEDs Brightness Control
button (refer to Fig-2).
5. LCD Contrast Control: The 8 levels of LCD contrast may be
adjusted by pressing the LCD Contrast Control button.
6. To rotate the orientation of the image displayed on the LCD
by 180 degrees, press the Rotate button. There are four (4)
possible image orientations that you can toggle through by
pressing this button.
7. When in use, the tube should easily maneuver itself into
position. Do not apply excessive force (refer to Fig-3).
8. The accessories included with the unit can be used to retrieve
small items like dropped rings, screws or grabbing wires (refer
to Fig-4).
Fig 1
OPERATION
LEDs
Provide Illumination
6
Fig 2
Advertisement
