Download Print this page

Troubleshooting - Whistler WIC-5000 User Manual

Multi-purpose
Hide thumbs Also See for WIC-5000:

Advertisement

Why won't the monitor turn on?
• Make sure that the monitor has been charged at least
overnight before first use. Press the reset button on the unit.
Message on monitor says to "See User Guide for

Troubleshooting".

• Make sure that the handheld unit is turned on and that the
camera tube is properly attached to the handheld unit.
The power light comes on but nothing shows on the screen?
• This could be due to weak batteries in the handheld. Replace
batteries.
• Is the camera tube fully inserted to the handheld unit? When
connecting the camera tube to the handheld unit, make sure
the keyed ends are properly aligned. Once they are lined up,
press in firmly and then finger tighten the knob to hold the
connector in place.
Why is my picture upside down?
• Simply press the image orientation button or move the camera
tube to properly orient the image.
What is the maximum depth the waterproof camera can be
submerged?
• Approximately 12 feet - the camera extension limit of the unit.
Camera tube has a rating of IP67.
TROUBLESHOOTING
9

Advertisement

loading