Advertisement
Installation
Install Batteries
1. Remove the cover.
2. Insert four (4) new AA batteries into the appropriate slots.
Proper battery orientation is indicated on the battery
compartment.
3. Replace battery cover.
Install the Camera with Flexible Tube
When connecting the camera tube to the handheld unit, make
sure that the keyed ends are properly aligned. Once they are
lined up, finger tighten the knob to hold the connector in place.
Install the Accessories
The three (3) included accessories (mirror, hook and magnet) are
all attached to the tube in the same way as illustrated below:
Place hook into hole at end of tube. Place rubber ring around
camera head and hook.
INSTALLATION
Keyed end plugs into socket
5
Advertisement
