Advertisement
Operation
1. Press and hold the power switch to turn the camera on
(refer to Fig 1).
2. The power indicator will illuminate and the LCD will
become viewable.
3. If the image on the LCD is unclear, try adjusting either
the brightness or mirror controls on the monitor.
4. LEDs Brightness Control: The 5 levels of LED
brightness can be adjusted. Refer to the LED's
brightness control section of this guide.
5. To rotate the orientation of the image displayed on
the LCD refer to the Image Rotation section of this
guide.
6. When in use, the tube should easily maneuver itself
into position (refer to Fig 3). Do not apply excessive
force.
7. The accessories included with the unit can be used
to retrieve small items like dropped rings, screws or
grabbing wires (refer to Fig 4).
OPERATION
8
Advertisement
